49 changed files with 1141 additions and 1149 deletions
--- a/0001-i386-Move-struct-ix86_frame-to-machine_function.diff.gz
+++ b/0001-i386-Move-struct-ix86_frame-to-machine_function.diff.gz
--- a/0002-i386-Use-reference-of-struct-ix86_frame-to-avoid-cop.diff.gz
+++ b/0002-i386-Use-reference-of-struct-ix86_frame-to-avoid-cop.diff.gz
--- a/0003-i386-More-use-reference-of-struct-ix86_frame-to-avoi.diff.gz
+++ b/0003-i386-More-use-reference-of-struct-ix86_frame-to-avoi.diff.gz
--- a/0004-i386-Don-t-use-reference-of-struct-ix86_frame.diff.gz
+++ b/0004-i386-Don-t-use-reference-of-struct-ix86_frame.diff.gz
--- a/0005-x86-Add-mindirect-branch-doc.diff.gz
+++ b/0005-x86-Add-mindirect-branch-doc.diff.gz
--- a/0005-x86-Add-mindirect-branch.diff.gz
+++ b/0005-x86-Add-mindirect-branch.diff.gz
--- a/0006-x86-Add-mfunction-return-doc.diff.gz
+++ b/0006-x86-Add-mfunction-return-doc.diff.gz
--- a/0006-x86-Add-mfunction-return.diff.gz
+++ b/0006-x86-Add-mfunction-return.diff.gz
--- a/0007-x86-Add-mindirect-branch-register-doc.diff.gz
+++ b/0007-x86-Add-mindirect-branch-register-doc.diff.gz
--- a/0007-x86-Add-mindirect-branch-register.diff.gz
+++ b/0007-x86-Add-mindirect-branch-register.diff.gz
--- a/0008-x86-Add-V-register-operand-modifier-doc.diff.gz
+++ b/0008-x86-Add-V-register-operand-modifier-doc.diff.gz
--- a/0008-x86-Add-V-register-operand-modifier.diff.gz
+++ b/0008-x86-Add-V-register-operand-modifier.diff.gz
--- a/0009-x86-Disallow-mindirect-branch-mfunction-return-with-.diff.gz
+++ b/0009-x86-Disallow-mindirect-branch-mfunction-return-with-.diff.gz
--- a/0009-x86-Disallow-mindirect-branch-mfunction-return-with-doc.diff.gz
+++ b/0009-x86-Disallow-mindirect-branch-mfunction-return-with-doc.diff.gz
--- a/14.2/convert32-supported
+++ b/14.2/convert32-supported
@ -1,95 +0,0 @@
-# List of tested packages using convert32pkg.
-# This list is safe to use with massconvert32.sh and safe to install.
-# Note that these are from slackware 14.2, including patches. -current is unsupported.
-
-# a
-bzip2
-dbus
-eudev
-xz
-
-# ap
-cups
-mpg123
-
-# d
-libtool
-llvm
-
-# l
-alsa-lib
-atk
-cairo
-elfutils
-expat
-freetype
-gdk-pixbuf2
-glib2
-glibc
-gmp
-gst-plugins-base
-gstreamer
-gtk+2
-harfbuzz
-icu4c
-lcms2
-libexif
-libffi
-libgphoto2
-libidn
-libieee1284
-libjpeg-turbo
-libnl3
-libpcap
-libpng
-libtiff
-libunistring
-libusb
-libxml2
-libxslt
-ncurses
-orc
-pango
-sdl
-svgalib
-v4l-utils
-zlib
-gamin
-
-# n
-cyrus-sasl
-gnutls
-libgcrypt
-libgpg-error
-nettle
-openldap-client
-openssl
-p11-kit
-
-# x
-fontconfig
-glu
-libX11
-libXau
-libXcomposite
-libXcursor
-libXdamage
-libXdmcp
-libXext
-libXfixes
-libXi
-libXinerama
-libXrandr
-libXrender
-libXv
-libXvMC
-libXxf86vm
-libdrm
-libpciaccess
-libxcb
-libxshmfence
-mesa
-pixman
-
-# xap
-sane
--- a/14.2/convert32pkg.sh
+++ b/14.2/convert32pkg.sh
@ -1,144 +0,0 @@
-#!/bin/sh -e
-
-pkginfodir='/var/log/packages/'
-pkgscriptdir='/var/log/scripts/'
-
-if [ "$#" -lt 1 ]; then
-    echo "Usage: $0 <package32> [package64]" 1>&2
-    exit 1
-fi
-
-pkg32="$(realpath "$1")"
-unset pkg64
-[ "$2" ] && pkg64="$(realpath "$2")"
-
-# Extract all package info
-# See /sbin/installpkg
-pkgbase="$(echo "$pkg32" | sed -e 's?.*/??;s/\.t[bglx]z$//')"
-pkgext="$(echo "$pkg32" | sed -e 's?.*/??;s/.*\.\(t[bglx]z\)$/\1/')"
-pkgname="$(echo "$pkgbase" | sed -e 's?-[^-]*-[^-]*-[^-]*$??')"
-pkgver="$(echo "$pkgbase" | sed -e 's?.*-\([^-]*\)-[^-]*-[^-]*$?\1?')"
-pkgarch="$(echo "$pkgbase" | sed -e 's?.*-[^-]*-\([^-]*\)-[^-]*$?\1?')"
-pkgbuild="$(echo "$pkgbase" | sed -e 's?.*-[^-]*-[^-]*-\([^-]*\)$?\1?')"
-
-case "$pkgarch" in
-    i?86) pkgarch=x86_64 ;;
-    *)
-        echo "Unsupported package architecture '$pkgarch'. Can't proceed." 1>&2
-        exit 1
-        ;;
-esac
-
-pkginfo="$pkginfodir/$pkgname-$pkgver-$pkgarch-$pkgbuild"
-pkgscript="$pkgscriptdir/$pkgname-$pkgver-$pkgarch-$pkgbuild"
-
-case "$pkgext" in
-    tgz) tool=gzip ;;
-    tbz) tool=bzip2 ;;
-    tlz) tool=lzma ;;
-    txz) tool=xz ;;
-esac
-
-temp="$(mktemp -d)"
-trap "rm -rf '$temp'" EXIT
-
-cd "$temp"
-explodepkg "$pkg32"
-
-# Remove all files present in the 64bit package
-if [ "$pkg64" ]; then
-    echo
-    echo "Removing files:"
-    $tool -cd "$pkg64" | tar-1.13 t | grep -v '^install/' | while read -r file; do
-        echo "./$file"
-        rm -f "./$file" 2> /dev/null || true
-    done
-else
-    if [ ! -f "$pkginfo" ]; then
-        echo "Package '$pkgname-$pkgver-$pkgarch-$pkgbuild' is not installed. Can't proceed." 1>&2
-        exit 1
-    fi
-
-    # See /sbin/removepkg
-    if fgrep './' "$pkginfo" 1> /dev/null 2>&1; then
-        TRIGGER='^\.\/'
-    else
-        TRIGGER='FILE LIST:'
-    fi
-
-    echo
-    echo 'Removing files:'
-    sed -n "/$TRIGGER/,/^$/p" "$pkginfo" | fgrep -v 'FILE LIST:' | grep -v '^install/' | while read -r file; do
-        echo "./$file"
-        rm -f "./$file" 2> /dev/null || true
-    done
-fi
-
-# Clean empty directories
-echo
-echo 'Empty directories:'
-find . -type d -empty -print -delete
-
-# Remove all symlinks present in the 64bit package
-if [ -f install/doinst.sh ]; then
-    if [ "$pkg64" ]; then
-        if ! $tool -cd "$pkg64" | tar-1.13 xO install/doinst.sh > install/doinst.64; then
-            echo "Failed to extract install/doinst.sh from '$pkg64'. Can't proceed." 1>&2
-            exit 1
-        fi
-    else
-        if [ ! -f "$pkgscript" ]; then
-            echo "Package '$pkgname-$pkgver-$pkgarch-$pkgbuild' is installed but has no installation script. Can't proceed." 1>&2
-            exit 1
-        fi
-        cp "$pkgscript" install/doinst.64
-    fi
-
-    # There's some packages that need special treatment
-    if [ "$pkgname" = 'glib2' -o "$pkgname" = 'cups' -o "$pkgname" = 'sane' ]; then
-        sed -i -e '/^for file in/,/^done/d' install/doinst.sh
-    fi
-    if [ "$pkgname" = 'cups' ]; then
-        sed -i -e '/^if \[ -e etc\/rc.d\/rc.cups \]; then/,/^fi/d' install/doinst.sh
-    fi
-    if [ "$pkgname" = 'eudev' ]; then
-        sed -i -e '/^if \[ \(-e etc\/rc.d\/rc.udev\|-r etc\/rc.d\/rc.udev.new\) \]; then/,/^fi/d' install/doinst.sh
-    fi
-    if [ "$pkgname" = 'dbus' ]; then
-        sed -i -e '/^if \[ \(-e etc\/rc.d\/rc.messagebus\|-r etc\/rc.d\/rc.messagebus.new\) \]; then/,/^fi/d' install/doinst.sh
-    fi
-
-    # Extract all lines treating with symlinks or config files. See /sbin/removepkg
-    sed -n -e 's,^[ ]*( [ ]*cd[ ]* .* [ ]*; [ ]*\(rm\|ln\) [ ]*-\(rf\|sf\)[ ]* .* [ ]*)[ ]*$,&,p' \
-           -e 's,^[ ]*config .*[ ]*$,&,p' install/doinst.64 > install/doinst
-    rm install/doinst.64
-
-    echo
-    echo 'Removed lines in doinst.sh:'
-    if [ -s install/doinst ]; then
-        fgrep -xf install/doinst install/doinst.sh || true
-
-        # Remove all symlinks present in the 64bit package
-        fgrep -vxf install/doinst install/doinst.sh > install/doinst.sh.new || true
-        mv install/doinst.sh.new install/doinst.sh
-
-        # If the resulting doinst.sh is empty, remove it.
-        if [ ! -s install/doinst.sh ]; then
-            rm install/doinst.sh
-        fi
-    fi
-    rm install/doinst
-fi
-
-# Rename package in slack-desc
-if [ -f install/slack-desc ]; then
-    sed -i -e '/^\$\|#\| *|/!s/^[^:]*:/convert32-&/' install/slack-desc
-fi
-
-if ! find . | grep -v '^.$\|^./install' > /dev/null; then
-    echo
-    echo 'Package is empty. Not running makepkg.' 1>&2
-    exit 0
-fi
-
-makepkg -l n -c n "$OLDPWD/convert32-$pkgname-$pkgver-$pkgarch-$pkgbuild.$pkgext"
--- a/14.2/kernel.SlackBuild
+++ b/14.2/kernel.SlackBuild
@ -1,229 +0,0 @@
-#!/bin/sh
-set -e
-
-# This is a SlackBuild script for building as-original-as-possible kernel packages.
-# It combines existing SlackBuilds and other files in the slackware source tree with vanilla SlackBuild conventions in a way that is clean and functional.
-# Unlike the "official" method of building a Slackware kernel, it builds and installs everything in $TMP, so it doesn't taint the host system, and you can build it as a regular user under fakeroot, if you wanted to.
-# This often means that the $PKG directory is used as an intermediate directory to run a SlackBuild in, and that said SlackBuilds may need to be modified to run properly in $PKG.
-
-# This script is tailored for x86_64. i?86 support is untested, and would need more modifications (such as building the -smp kernels and fixing $TMP in the packaging SlackBuilds).
-# Other architectures can be added, provided the source tree for them is anywhere close to the original slackware tree.
-
-# This SlackBuild should be placed in the "source/k" directory of the source DVD.
-# However, this directory doesn't contain all the files we need, as they're scattered all throughout the slackware tree.
-
-# This code may help prepare the source directory:
-if [ "$1" = prepare ]; then
-    shift
-
-    if [ $# -lt 3 ]; then
-        echo Usage: $0 prepare \<source\> \<install\> \<output\> 1>&2
-        echo e.g. $0 prepare /mnt/tmp/slackware-14.2-source-dvd/source /mnt/tmp/slackware64-14.2-install-dvd/slackware64 ./kernel 1>&2
-        exit 1
-    fi
-
-    SOURCE=$1
-    INSTALL=$2
-    OUT=$3
-
-    # Copy the "source/k" directory
-    cp -aT $SOURCE/k $OUT
-
-    # Copy the "source/d/kernel-headers" and "source/a/kernel-firmware" directories into it
-    cp -at $OUT $SOURCE/d/kernel-headers $SOURCE/a/kernel-firmware
-
-    # Copy "slackware*/k/kernel-source-*-noarch-*.txt" to use as slack-desc for kernel-source into it
-    mkdir -p $OUT/kernel-source
-    cp -aT $INSTALL/k/kernel-source-*-noarch-*.txt $OUT/kernel-source/slack-desc
-
-    # Copy the SlackBuild
-    cp -at $OUT $0
-
-    exit
-fi
-
-PKGNAM=${PKGNAM:-linux}
-BASEVER=${BASEVER:-4.4.14}
-VERSION=${VERSION:-$BASEVER}
-ARCH=${ARCH:-x86_64}
-KARCH=${KARCH:-x86}
-BUILD=${BUILD:-1}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/kernel}
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-export VERSION ARCH BUILD TMP
-
-# Extract the kernel source
-mkdir -p $TMP
-cd $TMP
-rm -rf $PKGNAM-$BASEVER $PKGNAM-$VERSION
-tar xvf $CWD/$PKGNAM-$BASEVER.tar.xz
-
-# Rename the kernel source directory to the proper VERSION
-# This is useful if you're applying stable patches and the actual VERSION is different from the one the tarball is named after
-if [ "$BASEVER" != "$VERSION" ]; then
-    mv $PKGNAM-$BASEVER $PKGNAM-$VERSION
-fi
-
-# Apply patches
-cd $PKGNAM-$VERSION
-#xzcat $CWD/patch-x.x.xx.xz | patch -p1 --verbose
-
-
-#
-# Build kernel-headers
-#
-cd $TMP/$PKGNAM-$VERSION
-
-# Install the kernel headers
-PKG=$TMP/package-kernel-headers
-rm -rf $PKG
-mkdir -p $PKG/usr
-make $NUMJOBS INSTALL_HDR_PATH=$PKG/usr headers_install
-
-# Apply some modifications that are present in the original kernel-headers package
-find $PKG/usr -type f -a ! -name '*.h' -delete
-rm -rf $PKG/usr/include/drm
-mv $PKG/usr/include/asm $PKG/usr/include/asm-$KARCH
-ln -sf asm-$KARCH $PKG/usr/include/asm
-
-# Install the slack-desc
-mkdir -p $PKG/install
-cat $CWD/kernel-headers/slack-desc > $PKG/install/slack-desc
-
-# Create the package
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/kernel-headers-$(echo $VERSION | tr - _)-$KARCH-$BUILD.txz
-
-
-#
-# Build kernel-huge
-#
-cd $TMP/$PKGNAM-$VERSION
-
-# Build the kernel image
-make $NUMJOBS mrproper
-cat $CWD/config-$ARCH/config-huge-* > .config
-make $NUMJOBS oldconfig
-make $NUMJOBS bzImage
-
-# Prepare the directory to run the packaging SlackBuild in
-PKG=$TMP/kernel-huge
-rm -rf $PKG
-mkdir -p $PKG
-cp arch/$KARCH/boot/bzImage $PKG
-cp System.map $PKG
-cp .config $PKG/config
-
-# Copy the packaging SlackBuild
-cp -aT $CWD/packaging-$ARCH/kernel-huge $PKG
-
-# Run the packaging SlackBuild
-cd $PKG
-./kernel-huge.SlackBuild
-
-
-#
-# Build kernel-generic
-#
-cd $TMP/$PKGNAM-$VERSION
-
-# Build the kernel image
-make $NUMJOBS mrproper
-cat $CWD/config-$ARCH/config-generic-* > .config
-make $NUMJOBS oldconfig
-make $NUMJOBS bzImage
-
-# Prepare the directory to run the packaging SlackBuild in
-PKG=$TMP/kernel-generic
-rm -rf $PKG
-mkdir -p $PKG
-cp arch/$KARCH/boot/bzImage $PKG
-cp System.map $PKG
-cp .config $PKG/config
-
-# Copy the packaging SlackBuild
-cp -aT $CWD/packaging-$ARCH/kernel-generic $PKG
-
-# Run the packaging SlackBuild
-cd $PKG
-./kernel-generic.SlackBuild
-
-
-#
-# Build kernel-modules
-#
-cd $TMP/$PKGNAM-$VERSION
-
-# Build the kernel modules with the already-present kernel-generic config
-make $NUMJOBS modules
-
-# Prepare the directory to run the packaging SlackBuild in
-PKG=$TMP/kernel-modules
-rm -rf $PKG
-mkdir -p $PKG
-make $NUMJOBS INSTALL_MOD_PATH=$PKG modules_install
-
-# Point the build and source links to the proper source directory in /usr/src, as packaged in kernel-source
-rm -f $PKG/lib/modules/$VERSION/build $PKG/lib/modules/$VERSION/source
-ln -s /usr/src/$PKGNAM-$VERSION $PKG/lib/modules/$VERSION/build
-ln -s /usr/src/$PKGNAM-$VERSION $PKG/lib/modules/$VERSION/source
-
-# Copy the packaging SlackBuild
-cp -aT $CWD/packaging-$ARCH/kernel-modules $PKG
-
-# Prefix absolute module paths in the SlackBuild with $CWD, since we installed the modules there
-sed -i -e 's@/lib/modules/@$CWD&@' $PKG/kernel-modules.SlackBuild
-
-# Run the packaging SlackBuild
-cd $PKG
-KERNELRELEASE=$VERSION ./kernel-modules.SlackBuild
-
-
-#
-# Build kernel-source
-#
-cd $TMP/$PKGNAM-$VERSION
-
-# Cleanup the source directory that was prepared and built with the kernel-generic config
-make $NUMJOBS clean
-make $NUMJOBS prepare
-rm .version .config.old
-
-# Install the kernel source
-PKG=$TMP/package-kernel-source
-rm -rf $PKG
-mkdir -p $PKG/usr/src
-ln -s $PKGNAM-$VERSION $PKG/usr/src/$PKGNAM
-
-# Install the slack-desc
-mkdir -p $PKG/install
-cat $CWD/kernel-source/slack-desc > $PKG/install/slack-desc
-
-# Create the package
-cd $PKG
-mv $TMP/$PKGNAM-$VERSION usr/src
-/sbin/makepkg -l y -c n $TMP/kernel-source-$(echo $VERSION | tr - _)-noarch-$BUILD.txz
-
-
-#
-# Build kernel-firmware
-#
-cd $TMP
-
-# Prepare the directory to run the packaging SlackBuild in
-PKG=$TMP/kernel-firmware
-rm -rf $PKG
-mkdir -p $PKG
-cp -aT $CWD/kernel-firmware $PKG
-
-# Use --depth=1 to cause git to not to download the entire history
-sed -i -e 's/git clone/& --depth=1/' $PKG/kernel-firmware.SlackBuild
-
-# Run the packaging SlackBuild
-cd $PKG
-unset VERSION  # The script uses `date` to make a $VERSION
-./kernel-firmware.SlackBuild
--- a/14.2/makechroot-minimal.sh
+++ b/14.2/makechroot-minimal.sh
@ -1,151 +0,0 @@
-#!/bin/sh
-set -eu
-
-if [ "$(id -u)" != 0 ]; then
-    echo "This script needs root permissions!" 1>&2
-    exit 1
-fi
-
-if [ "$#" -lt 2 ]; then
-    echo "Usage: $0 [-a arch] [-v version] [-m mirror] [-b localmirror]" 1>&2
-    exit 1
-fi
-
-
-version='14.2'
-arch="$(uname -m)"
-mirror='https://mirrors.slackware.com/slackware'
-base=''
-
-# Minimal amount of packages required to run installpkg, removepkg and upgradepkg
-# bzip2 and gzip are optional, but required to support .tgz and .tbz packages
-# All of these exist in the 'a' package set
-packages_pkgtools='
-aaa_base
-aaa_elflibs
-bash
-bzip2
-coreutils
-etc
-findutils
-glibc-solibs
-grep
-gzip
-pkgtools
-sed
-tar
-util-linux
-xz
-'
-
-# Minimal amount of packages required to run slackpkg without the dialog interface
-# gnupg is optional, but required to verify the GPG signatures of packages
-# ca-certificates, openssl, bin and perl are optional, but required for HTTPS support
-# These exist over the 'a', 'ap' and 'n' package sets
-# perl exists in the 'd' package set
-# openssl and ca-certificates need to be installed last (after perl and bin, at least) for the doinst.sh to run correctly
-packages_slackpkg='
-bin
-diffutils
-gawk
-gnupg
-openssl-solibs
-perl
-slackpkg
-wget
-which
-
-openssl
-ca-certificates
-'
-
-# Parse arguments
-while getopts "v:a:m:b:" opt; do
-    case "$opt" in
-        v) version="$OPTARG" ;;
-        a) arch="$OPTARG" ;;
-        m) mirror="$OPTARG" ;;
-        b) base="$(realpath "$OPTARG")"  # Path to local mirror, to get the files from.
-    esac
-done
-
-# Build final variables
-case "$arch" in
-    x86_64)
-        pkgmain='slackware64'
-        ;;
-
-    *)
-        pkgmain='slackware'
-        ;;
-esac
-release="$pkgmain-$version"
-initrd='isolinux/initrd.img'
-checksums='CHECKSUMS.md5'
-
-# Create working directory
-temp="$(mktemp -d -t "$(basename "$0")".XXXXXX)"
-trap "rm -rf '$temp'" EXIT
-destdir="$PWD"
-cd "$temp"
-
-# Function to download (or copy) a file
-get() {
-    if [ "$base" ]; then
-        cp "$base/$1" "$2"
-    else
-        wget "$mirror/$release/$1" -O "$2"
-    fi
-}
-
-# Function to verify files based on the checksums file
-check() {
-    printf '%s' "$(tail +13 CHECKSUMS.md5 | grep "^[0-9a-f]*  ./$1$" | cut -d ' ' -f 1)  $2" | md5sum -c --quiet -
-}
-
-# Get the full path to a package
-package() {
-    tail +13 CHECKSUMS.md5 | grep "^[0-9a-f]*  ./$pkgmain/[^/]*/$1-[^-]*-[^-]*-[^-]*\.t.z$" | cut -d ' ' -f 3- | cut -c 3-
-}
-
-# Download checksums
-get "$checksums" CHECKSUMS.md5
-
-# Download installer initrd.img
-get "$initrd" initrd.img
-check "$initrd" initrd.img
-
-# Unpack and prepare the installer
-zcat initrd.img | cpio -id
-rm -rf initrd.img mnt pkg
-mkdir -p mnt/pkg pkg
-
-# Download packages
-for pkg in $packages_pkgtools; do
-    path="$(package "$pkg")"
-    name="$(basename "$path")"
-
-    get "$path" "pkg/$name"
-    check "$path" "pkg/$name"
-    echo "$name" >> pkg/_
-done
-for pkg in $packages_slackpkg; do
-    path="$(package "$pkg")"
-    name="$(basename "$path")"
-
-    get "$path" "mnt/pkg/$name"
-    check "$path" "mnt/pkg/$name"
-    echo "$name" >> mnt/pkg/_
-done
-
-# Bootstrap pkgtools and it's dependencies
-env -i chroot . sh -l -c 'while read pkg; do /usr/lib/setup/installpkg --root /mnt --terse "/pkg/$pkg"; done < /pkg/_'
-
-# Install slackpkg and it's dependencies
-env -i chroot mnt sh -l -c 'while read pkg; do /sbin/installpkg --terse "/pkg/$pkg"; done < /pkg/_'
-
-# Configuration
-printf '%s\n' "$mirror/$release/" >> mnt/etc/slackpkg/mirrors
-
-# Compress the package
-tar cvJf "$destdir/$release.tar.xz" --sort=name --exclude=./pkg -C mnt .
--- a/14.2/makechroot.sh
+++ b/14.2/makechroot.sh
@ -1,63 +0,0 @@
-#!/bin/sh -e
-set -e
-
-if [ "$(id -u)" != 0 ]; then
-    echo "This script needs root permissions!" 1>&2
-    exit 1
-fi
-
-if [ "$#" -lt 2 ]; then
-    echo "Usage: $0 <slackware> <chroot>" 1>&2
-    exit 1
-fi
-
-slackware="$(realpath "$1")"
-chroot="$(realpath "$2")"
-
-temp="$(mktemp -d -t makechroot.XXXXXX)"
-
-# Make sure we clean up properly before exitting
-cleanup() {
-    mountpoint -q "$temp/mnt" && umount "$temp/mnt"
-    mountpoint -q "$temp/dvd" && umount "$temp/dvd"
-    rm -rf "$temp"
-}
-trap 'cleanup' EXIT
-
-# Extract the initrd
-cd "$temp"
-gzip -cd "$slackware/isolinux/initrd.img" | cpio -id
-
-# Mount the dvd
-mkdir dvd
-mount --bind "$slackware" dvd
-
-# Mount the destination
-mkdir -p "$chroot"
-mount --bind "$chroot" mnt
-
-# Install the packages
-env -i chroot . sh -l -c '
-/usr/lib/setup/installpkg --root /mnt --terse /dvd/slackware*/*/*.t?z
-
-cd /mnt
-for script in \
-    04.mkfontdir \
-    05.fontconfig \
-    07.update-desktop-database \
-    07.update-mime-database \
-    08.gtk-update-icon-cache \
-    11.cacerts \
-    cups-genppdupdate
-do
-    var/log/setup/setup.$script
-done
-chroot . /usr/bin/update-gtk-immodules > /dev/null 2>&1
-chroot . /usr/bin/update-gdk-pixbuf-loaders > /dev/null 2>&1
-chroot . /usr/bin/update-pango-querymodules > /dev/null 2>&1
-chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas > /dev/null 2>&1
-'
-# We only run a few setup scripts that do not require user interaction, and deal with updating caches and such, which is not done (properly) by the doinst.sh scripts.
-# To get a full list, run: bzcat MANIFEST.bz2 | awk '{print $6}' | grep '^var/log/setup/setup\.' | sort
-# Besides the setup scripts, we also need to run some programs which are usually ran from /etc/rc.d/rc.M, but not from the setup scripts.
-# This is tailored to Slackware 14.2. I'm unsure whether it'll work properly on any other version.
--- a/14.2/massconvert32.sh
+++ b/14.2/massconvert32.sh
@ -1,58 +0,0 @@
-#!/bin/sh
-set -e
-
-# DISCLAIMER
-# Don't ever think of installing every single package generated with this script.
-# While it *should* not cause any problems, doing so is simply overkill, untested, and not recommended in the least.
-
-if [ "$#" -lt 2 ]; then
-    echo "Usage: $0 <slackware> <slackware64> [whitelist]" 1>&2
-    exit 1
-fi
-
-scriptdir="$(realpath "$(dirname "$0")")"
-
-slackware="$1"
-slackware64="$2"
-whitelist="$3"
-
-find "$slackware" -type f -name "*.t?z" -printf '%P\n' | sort | while read -r pkg; do
-    # See /sbin/installpkg
-    pkgbase="$(echo "$pkg" | sed -e 's?.*/??;s/\.t[bglx]z$//')"
-    pkgext="$(echo "$pkg" | sed -e 's?.*/??;s/.*\.\(t[bglx]z\)$/\1/')"
-    pkgname="$(echo "$pkgbase" | sed -e 's?-[^-]*-[^-]*-[^-]*$??')"
-    pkgver="$(echo "$pkgbase" | sed -e 's?.*-\([^-]*\)-[^-]*-[^-]*$?\1?')"
-    pkgarch="$(echo "$pkgbase" | sed -e 's?.*-[^-]*-\([^-]*\)-[^-]*$?\1?')"
-
-    if [ "$whitelist" ]; then
-        if ! grep -v '^#' "$whitelist" | fgrep -xq "$pkgname"; then
-            continue
-        fi
-    fi
-
-    case "$pkgarch" in
-        i?86) pkgarch=x86_64 ;;
-        # Architecture-independent stuff
-        noarch|fw) continue ;;
-        # Only kernel-headers uses x86 as pkgarch. That doesn't need conversion.
-        x86) continue ;;
-        *)
-            echo "WARNING: Package '$pkg' has an unsupported architecture: '$pkgarch'"
-            exit
-            ;;
-    esac
-
-    if [ ! -f "$slackware64/$(dirname "$pkg")/$pkgname-$pkgver-$pkgarch-"*".$pkgext" ]; then
-        echo "WARNING: Package '$pkg' doesn't exist in slackware64, or there were multiple with different build versions."
-        continue
-    fi
-
-    rpkg="$(realpath "$slackware/$pkg")"
-    rpkg64="$(realpath "$slackware64/$(dirname "$pkg")/$pkgname-$pkgver-$pkgarch-"*".$pkgext")"
-
-    mkdir -p "$(dirname "$pkg")"
-
-    ( cd "$(dirname "$pkg")"
-        "$scriptdir/convert32pkg.sh" "$rpkg" "$rpkg64"
-    )
-done
--- a/14.2/update-repo.sh
+++ b/14.2/update-repo.sh
@ -1,188 +0,0 @@
-#!/bin/sh
-set -e
-
-gpgkey=''
-timestamp="$(LC_ALL=C date -u)"
-cachedir='.cache'
-
-# Cleanup
-if [ "$1" = 'clean' ]; then
-    rm -rf "$cachedir" ChangeLog.txt PACKAGES.TXT MANIFEST.bz2 FILELIST.TXT CHECKSUMS.md5 CHECKSUMS.md5.asc GPG-KEY
-    find . -regex '.*\.t[bglx]z$' | while read -r package; do
-        pkgbase="$(echo "$package" | sed 's?.*/??;s/\.t[bglx]z$//')"
-        rm -f "$(dirname "$package")/$pkgbase.txt"
-        rm -f "$package.asc"
-    done
-
-    exit
-fi
-
-mkdir -p "$cachedir"
-
-# Process all packages
-find . -regex '.*\.t[bglx]z$' | while read -r package; do
-    case "$package" in
-        *.tgz)
-            tool=gzip
-            ;;
-        *.tbz)
-            tool=bzip2
-            ;;
-        *.tlz)
-            tool=lzma
-            ;;
-        *.txz)
-            tool=xz
-            ;;
-    esac
-
-    # See the pkgbase and package_name functions in /sbin/installpkg
-    pkgbase="$(echo "$package" | sed 's?.*/??;s/\.t[bglx]z$//')"
-    pkgdir="$(dirname "$package")"
-    pkgname="$(echo "$pkgbase" | sed 's?-[^-]*-[^-]*-[^-]*$??')"
-
-    pkgtxt="$pkgdir/$pkgbase.txt"
-    pkgmeta="$cachedir/$pkgdir/$pkgbase.meta"
-    pkgmanifest="$cachedir/$pkgdir/$pkgbase.manifest"
-    pkgsize="$cachedir/$pkgdir/$pkgbase.size"
-    pkgusize="$cachedir/$pkgdir/$pkgbase.usize"
-
-    pkgsum="$cachedir/$pkgdir/$pkgbase.checksum"
-
-    if [ -f "$pkgtxt" -a \
-         -f "$pkgmeta" -a \
-         -f "$pkgmanifest" -a \
-         -f "$pkgsize" -a \
-         -f "$pkgusize" -a \
-         -f "$pkgsum" ]; then
-        if [ "$gpgkey" ]; then
-            if [ -f "$package.asc" ]; then
-                md5sum --status -c "$pkgsum" && continue
-            fi
-        else
-            md5sum --status -c "$pkgsum" && continue
-        fi
-    fi
-
-    echo "Adding $package..."
-    mkdir -p "$cachedir/$pkgdir"
-
-    # Decompress the package
-    tmppkg="$(mktemp)"
-    $tool -cd "$package" > "$tmppkg"
-
-    # Get package size
-    du -k "$package" | cut -f 1 > "$pkgsize"
-    du -k "$tmppkg" | cut -f 1 > "$pkgusize"
-
-    # Generate .txt file (see /usr/bin/slackdtxt)
-    (tar xOf "$tmppkg" install/slack-desc 2> /dev/null || echo "$pkgname:") | egrep -v '^($|#| *\|)' > "$pkgtxt"
-
-    # Create manifest for this package
-    cat > "$pkgmanifest" << EOF
-++========================================
-||
-||   Package:  $package
-||
-++========================================
-$(TZ=EST tar tvvf "$tmppkg")
-
-
-EOF
-
-    # Create metadata for this package
-    # Source for the sed line: https://stackoverflow.com/questions/1444406/how-can-i-delete-duplicate-lines-in-a-file-in-unix#1444433
-    cat > "$pkgmeta" << EOF
-PACKAGE NAME:  $(basename "$package")
-PACKAGE LOCATION:  $pkgdir
-PACKAGE SIZE (compressed):  $(cat "$pkgsize" | xargs) K
-PACKAGE SIZE (uncompressed):  $(cat "$pkgusize" | xargs) K
-PACKAGE DESCRIPTION:
-$(cat "$pkgtxt" | sed -e '$!N; /^\(.*\)\n\1$/!P; D')
-
-EOF
-
-    # Sign the package
-    rm -f "$package.asc"
-    [ "$gpgkey" ] && gpg -bas --use-agent --batch -u "$gpgkey" "$package"
-
-    # Remove decompressed package
-    rm -f "$tmppkg"
-
-    # Save checksum
-    md5sum "$package" > "$pkgsum"
-done
-
-# Generate shitty ChangeLog.txt
-echo "$timestamp" > ChangeLog.txt
-
-# Create GPG-KEY
-if [ "$gpgkey" ]; then
-    gpg --list-keys "$gpgkey" > GPG-KEY
-    gpg -a --export "$gpgkey" >> GPG-KEY
-fi
-
-# Generate PACKAGES.TXT
-echo "Generating PACKAGES.TXT..."
-
-cat > PACKAGES.TXT << EOF
-
-PACKAGES.TXT;  $timestamp
-
-This file provides details on the Slackware packages found
-in this directory.
-
-Total size of all packages (compressed):  $(expr \( 0$(find "$cachedir" -type f -name '*.size' | xargs cat | xargs printf ' + %s') \) / 1024 || true) MB
-Total size of all packages (uncompressed):  $(expr \( 0$(find "$cachedir" -type f -name '*.usize' | xargs cat | xargs printf ' + %s') \) / 1024 || true) MB
-
-
-EOF
-
-# https://stackoverflow.com/questions/4255603/sort-files-by-basename#4256095
-find "$cachedir" -type f -name '*.meta' | perl -e 'print sort{($p=$a)=~s!.*/!!;($q=$b)=~s!.*/!!;$p cmp$q}<>' | xargs cat >> PACKAGES.TXT
-
-echo >> PACKAGES.TXT
-
-# Generate MANIFEST.bz2
-echo "Generating MANIFEST.bz2..."
-find "$cachedir" -type f -name '*.manifest' | sort | xargs cat | bzip2 -9 -z > MANIFEST.bz2
-
-# Generate FILELIST.TXT
-echo "Generating FILELIST.TXT..."
-
-cat > FILELIST.TXT << EOF
-$timestamp
-
-Here is the file list for this directory.  If you are using a 
-mirror site and find missing or extra files in the disk 
-subdirectories, please have the archive administrator refresh
-the mirror.
-
-EOF
-find . ! -path "./$cachedir/*" -a ! -name "$cachedir" | sort | xargs fakeroot ls -ld --time-style=long-iso > FILELIST.TXT
-
-# Generate CHECKSUMS.md5
-echo "Generating CHECKSUMS.md5..."
-
-cat > CHECKSUMS.md5 << EOF
-These are the MD5 message digests for the files in this directory.
-If you want to test your files, use 'md5sum' and compare the values to
-the ones listed here.
-
-To test all these files, use this command:
-
-tail +13 CHECKSUMS.md5 | md5sum -c --quiet - | less
-
-'md5sum' can be found in the GNU coreutils package on ftp.gnu.org in
-/pub/gnu, or at any GNU mirror site.
-
-MD5 message digest                Filename
-EOF
-find . -type f -a ! -path "./$cachedir/*" | sort | xargs md5sum >> CHECKSUMS.md5
-
-# Sign CHECKSUMS.md5
-rm -f CHECKSUMS.md5.asc
-[ "$gpgkey" ] && gpg -bas --use-agent --batch -u "$gpgkey" CHECKSUMS.md5
-
-# Remove tmpdir
-rm -rf "$tmpdir"
--- a/15.0/makechroot-minimal.sh
+++ b/15.0/makechroot-minimal.sh
@ -1,143 +0,0 @@
-#!/bin/sh
-set -eu
-
-if [ "$(id -u)" != 0 ]; then
-    echo "This script needs root permissions!" 1>&2
-    exit 1
-fi
-
-if [ "$#" -lt 1 ]; then
-    echo "Usage: $0 [-a arch] [-m mirror] <chroot>" 1>&2
-    exit 1
-fi
-
-
-arch="$(uname -m)"
-mirror='https://mirrors.slackware.com/slackware/slackware64-current'
-
-# Minimal amount of packages required to run installpkg, removepkg, upgradepkg, explodepkg and makepkg
-# All of these exist in the 'a' package set
-packages_pkgtools='
-aaa_base
-aaa_elflibs
-bash
-coreutils
-etc
-findutils
-glibc-solibs
-grep
-pkgtools
-sed
-tar
-util-linux
-which
-xz
-'
-
-# Minimal amount of packages required to run slackpkg without the dialog interface
-# Supporting https, gpg, and upgrade-all.
-# These exist over the 'a', 'ap', 'n' and 'l' package sets
-# ca-certificates needs to be installed after openssl for the doinst.sh to run correctly
-packages_extra='
-bzip2
-diffutils
-gawk
-gnupg
-gzip
-libpsl
-libunistring
-pcre2
-slackpkg
-wget
-
-openssl
-ca-certificates
-'
-
-# Parse arguments
-while getopts "a:m:" opt; do
-    case "$opt" in
-        a) arch="$OPTARG" ;;
-        m)
-            if [ -d "$OPTARG" ]; then
-                mirror="$(realpath "$OPTARG")"
-            else
-                mirror="$OPTARG"
-            fi
-            ;;
-    esac
-done
-shift $(expr $OPTIND - 1)
-[ "$#" -ge 1 ] && [ "$1" = "--" ] && shift
-
-# Build final variables
-case "$arch" in
-    x86_64) pkgmain='slackware64' ;;
-    *) pkgmain='slackware' ;;
-esac
-initrd='isolinux/initrd.img'
-checksums='CHECKSUMS.md5'
-chroot="$(realpath "$1")"
-
-# Create working directory
-temp="$(mktemp -d -t "$(basename "$0")".XXXXXX)"
-cleanup() {
-    if mountpoint -q "$temp/mnt/pkg"; then
-        umount "$temp/mnt/pkg"
-        rmdir "$temp/mnt/pkg"
-    fi
-    mountpoint -q "$temp/mnt" && umount "$temp/mnt"
-    rm -rf "$temp"
-}
-trap 'cleanup' EXIT
-cd "$temp"
-
-# Function to download (or copy) a file
-get() {
-    if [ -d "$mirror" ]; then
-        cp "$mirror/$1" "$2"
-    else
-        wget "$mirror/$1" -O "$2"
-    fi
-}
-
-# Function to verify files based on the checksums file
-check() {
-    printf '%s' "$(tail +13 CHECKSUMS.md5 | grep "^[0-9a-f]*  ./$1$" | cut -d ' ' -f 1)  $2" | md5sum -c --quiet -
-}
-
-# Get the full path to a package
-package() {
-    tail +13 CHECKSUMS.md5 | grep "^[0-9a-f]*  ./$pkgmain/[^/]*/$1-[^-]*-[^-]*-[^-]*\.t.z$" | cut -d ' ' -f 3- | cut -c 3-
-}
-
-# Download checksums
-get "$checksums" CHECKSUMS.md5
-
-# Download installer initrd.img
-get "$initrd" initrd.img
-check "$initrd" initrd.img
-
-# Unpack and prepare the installer
-xz -cd initrd.img | cpio -id
-rm -f initrd.img
-mkdir -p pkg "$chroot"
-mount --bind "$chroot" mnt
-mkdir -p mnt/pkg
-mount --bind pkg mnt/pkg
-
-# Download packages
-for pkg in $packages_pkgtools $packages_extra; do
-    path="$(package "$pkg")"
-    name="$(basename "$path")"
-    get "$path" "pkg/$name"
-    check "$path" "pkg/$name"
-done
-for pkg in $packages_pkgtools; do echo "$(basename "$(package "$pkg")")" >> pkg/__; done
-for pkg in $packages_extra; do echo "$(basename "$(package "$pkg")")" >> pkg/_; done
-
-# Bootstrap pkgtools and its dependencies
-env -i chroot . sh -l -c 'while read pkg; do /sbin/installpkg --root /mnt --terse "/pkg/$pkg"; done < /pkg/__'
-
-# Install slackpkg and its dependencies
-env -i chroot mnt sh -l -c 'while read pkg; do /sbin/installpkg --terse "/pkg/$pkg"; done < /pkg/_'
--- a/15.0/makechroot.sh
+++ b/15.0/makechroot.sh
@ -1,63 +0,0 @@
-#!/bin/sh -e
-set -e
-
-if [ "$(id -u)" != 0 ]; then
-    echo "This script needs root permissions!" 1>&2
-    exit 1
-fi
-
-if [ "$#" -lt 2 ]; then
-    echo "Usage: $0 <slackware> <chroot>" 1>&2
-    exit 1
-fi
-
-slackware="$(realpath "$1")"
-chroot="$(realpath "$2")"
-
-temp="$(mktemp -d -t makechroot.XXXXXX)"
-
-# Make sure we clean up properly before exitting
-cleanup() {
-    mountpoint -q "$temp/mnt" && umount "$temp/mnt"
-    mountpoint -q "$temp/dvd" && umount "$temp/dvd"
-    rm -rf "$temp"
-}
-trap 'cleanup' EXIT
-
-# Extract the initrd
-cd "$temp"
-xz -cd "$slackware/isolinux/initrd.img" | cpio -id
-
-# Mount the dvd
-mkdir dvd
-mount --bind "$slackware" dvd
-
-# Mount the destination
-mkdir -p "$chroot"
-mount --bind "$chroot" mnt
-
-# Install the packages
-env -i chroot . sh -l -c '
-/sbin/installpkg --root /mnt --terse /dvd/slackware*/*/*.t?z
-
-cd /mnt
-for script in \
-    04.mkfontdir \
-    05.fontconfig \
-    07.update-desktop-database \
-    07.update-mime-database \
-    08.gtk-update-icon-cache \
-    11.cacerts \
-    cups-genppdupdate
-do
-    var/lib/pkgtools/setup/setup.$script
-done
-chroot . /usr/bin/update-gtk-immodules > /dev/null 2>&1
-HOME=/root chroot . /usr/bin/update-gdk-pixbuf-loaders > /dev/null 2>&1
-chroot . /usr/bin/update-pango-querymodules > /dev/null 2>&1
-chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas > /dev/null 2>&1
-'
-# We only run a few setup scripts that do not require user interaction, and deal with updating caches and such, which is not done (properly) by the doinst.sh scripts.
-# To get a full list, run: bzcat MANIFEST.bz2 | awk '{print $6}' | grep '^var/log/setup/setup\.' | sort
-# Besides the setup scripts, we also need to run some programs which are usually ran from /etc/rc.d/rc.M, but not from the setup scripts.
-# This is tailored to Slackware 15.0-current, I'm unsure whether it'll work properly on any other version.
--- a/antlr-runtime-3.4.jar
+++ b/antlr-runtime-3.4.jar
--- a/c89.sh
+++ b/c89.sh
@ -0,0 +1,10 @@
+#!/bin/sh
+fl="-std=c89"
+for opt; do
+  case "$opt" in
+    -ansi|-std=c89|-std=iso9899:1990) fl="";;
+    -std=*) echo "`basename $0` called with non ANSI/ISO C option $opt" >&2
+	    exit 1;;
+  esac
+done
+exec gcc $fl ${1+"$@"}
--- a/c99.sh
+++ b/c99.sh
@ -0,0 +1,10 @@
+#!/bin/sh
+fl="-std=c99"
+for opt; do
+  case "$opt" in
+    -std=c99|-std=iso9899:1999) fl="";;
+    -std=*) echo "`basename $0` called with non ISO C99 option $opt" >&2
+	    exit 1;;
+  esac
+done
+exec gcc $fl ${1+"$@"}
--- a/create_gcj_jvm.sh
+++ b/create_gcj_jvm.sh
@ -0,0 +1,93 @@
+# ---------------------------------------------------------------------------
+# This script creates a directory structure below /usr/lib/jvm and populates
+# it with symlinks to GCC binaries.
+# This will work as a compatibility layer to emulate an Oracle JDK/JRE.
+# This emulation is required in order to compile OpenJDK using GNU java.
+#
+# The same can automatically be achieved in Slackware's gcc packages if
+# the 'configure' command is called with the following additional parameters:
+#     --enable-java-home \
+#     --with-java-home=/usr/lib$LIBDIRSUFFIX/jvm/jre \
+#     --with-jvm-root-dir=/usr/lib$LIBDIRSUFFIX/jvm \
+#     --with-jvm-jar-dir=/usr/lib$LIBDIRSUFFIX/jvm/jvm-exports \
+#     --with-arch-directory=$LIB_ARCH \
+#
+# Author: Eric Hameleers <alien@slackware.com> December 2011
+# ---------------------------------------------------------------------------
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+  LIB_ARCH=amd64
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=$ARCH
+fi
+
+# Where does the OpenJDK SlackBuild expect the GNU java compatibility symlinks:
+JVM=${1:-/usr/lib${LIBDIRSUFFIX}/jvm}
+BINDIR=/usr/bin
+
+# What version of GCC do we have installed:
+GCJVER=$(gcj -dumpversion)
+
+# First, remove the old set of symlinks if they should exist:
+rm -fr $JVM
+
+# Create a JDK compatible directory structure for GNU java:
+mkdir -p $JVM
+mkdir -p $JVM/bin
+mkdir -p $JVM/jre/bin
+mkdir -p $JVM/jre/lib/${LIB_ARCH}/client
+mkdir -p $JVM/jre/lib/${LIB_ARCH}/server
+mkdir -p $JVM/lib
+
+ln -sf $BINDIR/gjar $JVM/bin/jar
+ln -sf $BINDIR/grmic $JVM/bin/rmic
+ln -sf $BINDIR/gjavah $JVM/bin/javah
+ln -sf $BINDIR/jcf-dump $JVM/bin/javap
+ln -sf $BINDIR/gappletviewer $JVM/bin/appletviewer
+ln -sf $BINDIR/grmiregistry $JVM/bin/rmiregistry
+ln -sf $BINDIR/grmiregistry $JVM/jre/bin/rmiregistry
+ln -sf $BINDIR/gkeytool $JVM/bin/keytool
+ln -sf $BINDIR/gkeytool $JVM/jre/bin/keytool
+ln -sf $BINDIR/gij $JVM/bin/java
+ln -sf $BINDIR/ecj $JVM/bin/javac
+ln -sf /usr/lib/gcj-${GCJVER}-11/libjvm.so $JVM/jre/lib/${LIB_ARCH}/client/libjvm.so
+ln -sf /usr/lib/gcj-${GCJVER}-11/libjvm.so $JVM/jre/lib/${LIB_ARCH}/server/libjvm.so
+ln -sf /usr/lib/gcj-${GCJVER}-11/libjawt.so $JVM/jre/lib/${LIB_ARCH}/libjawt.so
+ln -sf /usr/share/java/libgcj-${GCJVER}.jar $JVM/jre/lib/rt.jar
+ln -sf /usr/share/java/libgcj-tools-${GCJVER}.jar $JVM/lib/tools.jar
+ln -sf /usr/include/c++/${GCJVER}/gnu/java $JVM/include
+
+# Add a Eclipse Java Compiler wrapper which is required
+# for bootstrapping OpenJDK using GNU java:
+cat <<EOT > /usr/bin/ecj
+#!/bin/sh
+
+CLASSPATH=/usr/share/java/ecj.jar\${CLASSPATH:+:}\$CLASSPATH \
+  java org.eclipse.jdt.internal.compiler.batch.Main "\$@"
+
+EOT
+chmod 755 /usr/bin/ecj
+
+
--- a/ecj-4.9.jar
+++ b/ecj-4.9.jar
--- a/ecj.sh
+++ b/ecj.sh
@ -0,0 +1,5 @@
+#!/bin/sh
+
+CLASSPATH=@JAVADIR@/ecj.jar${CLASSPATH:+:}$CLASSPATH \
+  java org.eclipse.jdt.internal.compiler.batch.Main "$@"
+
--- a/ecj.url
+++ b/ecj.url
@ -0,0 +1 @@
+ftp://sourceware.org/pub/java/ecj-4.9.jar
--- a/fastjar-0.97.tar.xz
+++ b/fastjar-0.97.tar.xz
--- a/fastjar-patches/1000-fastjar-0.97-segfault.patch.gz
+++ b/fastjar-patches/1000-fastjar-0.97-segfault.patch.gz
--- a/fastjar-patches/1001-fastjar-0.97-len1.patch.gz
+++ b/fastjar-patches/1001-fastjar-0.97-len1.patch.gz
--- a/fastjar-patches/1002-fastjar-0.97-filename0.patch.gz
+++ b/fastjar-patches/1002-fastjar-0.97-filename0.patch.gz
--- a/fastjar-patches/1003-fastjar-CVE-2010-0831.patch.gz
+++ b/fastjar-patches/1003-fastjar-CVE-2010-0831.patch.gz
--- a/fastjar-patches/1004-fastjar-man.patch.gz
+++ b/fastjar-patches/1004-fastjar-man.patch.gz
--- a/gcc-5.5.0.tar.xz
+++ b/gcc-5.5.0.tar.xz
--- a/gcc-5.5.0.tar.xz.sig
+++ b/gcc-5.5.0.tar.xz.sig
--- a/gcc-no_fixincludes.diff.gz
+++ b/gcc-no_fixincludes.diff.gz
--- a/gcc.SlackBuild
+++ b/gcc.SlackBuild
@ -0,0 +1,889 @@
+#!/bin/sh
+# GCC package build script (written by volkerdi@slackware.com)
+#
+# Copyright 2003, 2004  Slackware Linux, Inc., Concord, California, USA
+# Copyright 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# Modified 2011 by Eric Hameleers <alien at slackware.com> for OpenJDK.
+
+# Some notes, Fri May 16 12:31:32 PDT 2003:
+#
+# Why i486 and not i386?  Because the shared C++ libraries in gcc-3.2.x will
+# require 486 opcodes even when a 386 target is used (so we already weren't
+# compatible with the i386 for Slackware 9.0, didn't notice, and nobody
+# complained :-).  gcc-3.3 fixes this issue and allows you to build a 386
+# compiler, but the fix is done in a way that produces binaries that are not
+# compatible with gcc-3.2.x compiled binaries.  To retain compatibility with
+# Slackware 9.0, we'll have to use i486 (or better) as the compiler target
+# for gcc-3.3.
+#
+# It's time to say goodbye to i386 support in Slackware.  I've surveyed 386
+# usage online, and the most common thing I see people say when someone asks
+# about running Linux on a 386 is to "run Slackware", but then they also 
+# usually go on to say "be sure to get an OLD version, like 4.0, before glibc,
+# because it'll be more efficient."  Now, if that's the general advice, then
+# I see no reason to continue 386 support in the latest Slackware (and indeed
+# it's no longer easily possible).
+
+# Some more notes, Mon Aug  3 19:49:51 UTC 2015:
+#
+# Changing to -march=i586 for 32-bit x86 as several things (Mesa being one of
+# them) no longer work if constrained to -march=i486.  We're not going to use
+# -march=i686 since the only additional opcode is CMOV, which is actually less
+# efficient on modern CPUs running in 32-bit mode than the alternate i586
+# instructions.  No need to throw i586 CPUs under the bus (yet).
+
+PKGNAM=gcc
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack14.2}
+
+# How many jobs to run in parallel:
+NUMJOBS=" -j 7 "
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=i386
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=s390
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+  LIB_ARCH=amd64
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=armv7hl
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+  LIB_ARCH=$ARCH
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+# Temporary build location.  This should *NOT* be a directory
+# path a non-root user could create later...
+TMP=${TMP:-"/gcc-$(mcookie)"}
+
+# This is the main DESTDIR target:
+PKG1=$TMP/package-gcc
+# These are the directories to build other packages in:
+PKG2=$TMP/package-gcc-g++
+PKG3=$TMP/package-gcc-gfortran
+PKG4=$TMP/package-gcc-gnat
+PKG5=$TMP/package-gcc-java
+PKG6=$TMP/package-gcc-objc
+PKG7=$TMP/package-gcc-g++-gch
+PKG8=$TMP/package-gcc-go
+
+# Clear the build locations:
+if [ -d $TMP ]; then
+  rm -rf $TMP
+fi
+mkdir -p $PKG{1,2,3,4,5,6,7,8}/usr/doc/gcc-$VERSION
+
+# Insert package descriptions:
+mkdir -p $PKG{1,2,3,4,5,6,7,8}/install
+cat $CWD/slack-desc.gcc > $PKG1/install/slack-desc
+cat $CWD/slack-desc.gcc-g++ > $PKG2/install/slack-desc
+cat $CWD/slack-desc.gcc-gfortran > $PKG3/install/slack-desc
+cat $CWD/slack-desc.gcc-gnat > $PKG4/install/slack-desc
+cat $CWD/slack-desc.gcc-java > $PKG5/install/slack-desc
+cat $CWD/slack-desc.gcc-objc > $PKG6/install/slack-desc
+# cat $CWD/slack-desc.gcc-g++-gch > $PKG7/install/slack-desc
+cat $CWD/slack-desc.gcc-go > $PKG8/install/slack-desc
+
+cd $TMP
+tar xvf $CWD/gcc-$VERSION.tar.?z || exit 1
+
+# Patches based inside the gcc directory go here:
+#( cd gcc-$VERSION/gcc
+#  #zcat $CWD/gcc.66782.diff.gz | patch -p0 --verbose || exit 1
+#) || exit 1
+
+# Add ISL to the source
+( cd gcc-$VERSION
+    ISLVER=$(echo $CWD/isl-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+    rm -rf isl isl-$ISLVER
+    tar xvf $CWD/isl-$ISLVER.tar.xz || exit 1
+    mv isl-$ISLVER isl || exit 1
+) || exit 1
+
+# Copy ecj.jar into the TLD of the source. Needed for java compiler.
+# This can be retrieved from ftp://sourceware.org/pub/java
+cp $CWD/ecj-4.9.jar gcc-$VERSION/ecj.jar
+
+# Use an antlr runtime to compile javadoc.
+# The runtime can be obtained from:
+#https://oss.sonatype.org/content/repositories/releases/org/antlr/antlr-runtime/
+ANTLJAR=$(echo $CWD/antlr-*.jar | tail -1)
+
+# install docs
+( cd gcc-$VERSION
+  # Smite the fixincludes:
+  zcat $CWD/gcc-no_fixincludes.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1
+
+  # Add retpoline support:
+  zcat $CWD/0001-i386-Move-struct-ix86_frame-to-machine_function.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0002-i386-Use-reference-of-struct-ix86_frame-to-avoid-cop.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0003-i386-More-use-reference-of-struct-ix86_frame-to-avoi.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0004-i386-Don-t-use-reference-of-struct-ix86_frame.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0005-x86-Add-mindirect-branch-doc.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0005-x86-Add-mindirect-branch.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0006-x86-Add-mfunction-return-doc.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0006-x86-Add-mfunction-return.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0007-x86-Add-mindirect-branch-register-doc.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0007-x86-Add-mindirect-branch-register.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0008-x86-Add-V-register-operand-modifier-doc.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0008-x86-Add-V-register-operand-modifier.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0009-x86-Disallow-mindirect-branch-mfunction-return-with-.diff.gz | patch -p2 --verbose || exit 1
+  zcat $CWD/0009-x86-Disallow-mindirect-branch-mfunction-return-with-doc.diff.gz | patch -p2 --verbose || exit 1
+
+  # Fix perms/owners
+  chown -R root:root .
+  find . -perm 777 -exec chmod 755 {} \;
+  find . -perm 775 -exec chmod 755 {} \;
+  find . -perm 754 -exec chmod 755 {} \;
+  find . -perm 664 -exec chmod 644 {} \;
+  mkdir -p $PKG1/usr/doc/gcc-$VERSION
+  cp -a \
+    COPYING* ChangeLog* FAQ INSTALL \
+    LAST_UPDATED MAINTAINERS NEWS \
+    README* *.html \
+  $PKG1/usr/doc/gcc-$VERSION
+
+  # We will keep part of these, but they are really big...
+  if [ -r ChangeLog ]; then
+    DOCSDIR=$(echo $PKG1/usr/doc/gcc-$VERSION)
+    cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+    touch -r ChangeLog $DOCSDIR/ChangeLog
+  fi
+  if [ -r NEWS ]; then
+    DOCSDIR=$(echo $PKG1/usr/doc/gcc-$VERSION)
+    cat NEWS | head -n 1000 > $DOCSDIR/NEWS
+    touch -r NEWS $DOCSDIR/NEWS
+  fi
+
+  mkdir -p $PKG1/usr/doc/gcc-${VERSION}/gcc
+  ( cd gcc
+    cp -a \
+      ABOUT* COPYING* DATESTAMP DEV-PHASE LANG* ONEWS README* SERVICE \
+    $PKG1/usr/doc/gcc-$VERSION/gcc
+         
+    mkdir -p $PKG3/usr/doc/gcc-${VERSION}/gcc/fortran
+    ( cd fortran
+      if [ -r ChangeLog ]; then
+        cat ChangeLog | head -n 1000 > $PKG3/usr/doc/gcc-$VERSION/gcc/fortran/ChangeLog
+        touch -r ChangeLog $PKG3/usr/doc/gcc-$VERSION/gcc/fortran/ChangeLog
+      fi
+    )
+
+    mkdir -p $PKG4/usr/doc/gcc-${VERSION}/gcc/ada
+    ( cd ada
+      cp -a \
+        ChangeLog.tree-ssa \
+      $PKG4/usr/doc/gcc-$VERSION/gcc/ada
+      if [ -r ChangeLog ]; then
+        cat ChangeLog | head -n 1000 > $PKG4/usr/doc/gcc-$VERSION/gcc/ada/ChangeLog
+        touch -r ChangeLog $PKG4/usr/doc/gcc-$VERSION/gcc/ada/ChangeLog
+      fi
+    )
+
+    mkdir -p $PKG5/usr/doc/gcc-${VERSION}/gcc/java
+    ( cd java
+      cp -a \
+        ChangeLog.tree-ssa \
+      $PKG5/usr/doc/gcc-${VERSION}/gcc/java
+      if [ -r ChangeLog ]; then
+        cat ChangeLog | head -n 1000 > $PKG5/usr/doc/gcc-${VERSION}/gcc/java/ChangeLog
+        touch -r ChangeLog $PKG5/usr/doc/gcc-${VERSION}/gcc/java/ChangeLog
+      fi
+    )
+  
+    mkdir -p $PKG6/usr/doc/gcc-${VERSION}/gcc/objc
+    ( cd objc
+      cp -a \
+        README* \
+      $PKG6/usr/doc/gcc-${VERSION}/gcc/objc
+      if [ -r ChangeLog ]; then
+        cat ChangeLog | head -n 1000 > $PKG6/usr/doc/gcc-${VERSION}/gcc/objc/ChangeLog
+        touch -r ChangeLog $PKG6/usr/doc/gcc-${VERSION}/gcc/objc/ChangeLog
+      fi
+    )
+
+    mkdir -p $PKG8/usr/doc/gcc-${VERSION}/gcc/go
+    ( cd go
+      if [ -r ChangeLog ]; then
+        cat ChangeLog | head -n 1000 > $PKG8/usr/doc/gcc-${VERSION}/gcc/go/ChangeLog
+        touch -r ChangeLog $PKG8/usr/doc/gcc-${VERSION}/gcc/go/ChangeLog
+      fi
+      cp -a \
+        README* THREADS* \
+        gofrontend/{LICENSE,PATENTS,README} \
+      $PKG8/usr/doc/gcc-${VERSION}/gcc/go
+    )
+
+  ) || exit 1
+
+  mkdir -p $PKG3/usr/doc/gcc-${VERSION}/libgfortran
+  ( cd libgfortran
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG3/usr/doc/gcc-${VERSION}/libgfortran/ChangeLog
+      touch -r ChangeLog $PKG3/usr/doc/gcc-${VERSION}/libgfortran/ChangeLog
+    fi
+  )
+
+  mkdir -p $PKG4/usr/doc/gcc-${VERSION}/libada
+  ( cd libada
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG4/usr/doc/gcc-${VERSION}/libada/ChangeLog
+      touch -r ChangeLog $PKG4/usr/doc/gcc-${VERSION}/libada/ChangeLog
+    fi
+  )
+
+  mkdir -p $PKG5/usr/doc/gcc-${VERSION}/libffi
+  ( cd libffi
+    cp -a \
+      ChangeLog.libgcj ChangeLog.v1 \
+      LICENSE* README* \
+    $PKG5/usr/doc/gcc-${VERSION}/libffi
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG5/usr/doc/gcc-${VERSION}/libffi/ChangeLog
+      touch -r ChangeLog $PKG5/usr/doc/gcc-${VERSION}/libffi/ChangeLog
+    fi
+  )
+
+  mkdir -p $PKG5/usr/doc/gcc-${VERSION}/libjava
+  ( cd libjava
+    cp -a \
+      COPYING* HACKING LIBGCJ_LICENSE \
+      NEWS README* THANKS \
+    $PKG5/usr/doc/gcc-${VERSION}/libjava
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG5/usr/doc/gcc-${VERSION}/libjava/ChangeLog
+      touch -r ChangeLog $PKG5/usr/doc/gcc-${VERSION}/libjava/ChangeLog
+    fi
+  )
+
+  mkdir -p $PKG1/usr/doc/gcc-${VERSION}/libmudflap
+  ( cd libmudflap
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG1/usr/doc/gcc-${VERSION}/libmudflap/ChangeLog
+      touch -r ChangeLog $PKG1/usr/doc/gcc-${VERSION}/libmudflap/ChangeLog
+    fi
+  )
+
+  mkdir -p $PKG1/usr/doc/gcc-${VERSION}/libgomp
+  ( cd libgomp
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG1/usr/doc/gcc-${VERSION}/libgomp/ChangeLog
+      touch -r ChangeLog $PKG1/usr/doc/gcc-${VERSION}/libgomp/ChangeLog
+    fi
+  )
+  
+  mkdir -p $PKG6/usr/doc/gcc-${VERSION}/libobjc
+  ( cd libobjc
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG6/usr/doc/gcc-${VERSION}/libobjc/ChangeLog
+      touch -r ChangeLog $PKG6/usr/doc/gcc-${VERSION}/libobjc/ChangeLog
+    fi
+    cp -a \
+      README* THREADS* \
+    $PKG6/usr/doc/gcc-${VERSION}/libobjc
+  )
+    
+  mkdir -p $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3
+  ( cd libstdc++-v3
+    cp -a \
+      README* \
+      doc/html/faq.html \
+    $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3
+    if [ -r ChangeLog ]; then
+      cat ChangeLog | head -n 1000 > $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3/ChangeLog
+      touch -r ChangeLog $PKG2/usr/doc/gcc-${VERSION}/libstdc++-v3/ChangeLog
+    fi
+  )
+
+)
+
+# Add fastjar to the gcc-java package:
+( cd $TMP
+  FASTJARVER=$(echo $CWD/fastjar-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
+  echo
+  echo "Building fastjar-$FASTJARVER first"
+  echo
+  rm -rf fastjar-$FASTJARVER
+  tar xvf $CWD/fastjar-$FASTJARVER.tar.xz || exit 1
+  cd fastjar-$FASTJARVER || exit 1
+  chown -R root:root .
+  find . \
+    \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+    -exec chmod 755 {} \; -o \
+    \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+    -exec chmod 644 {} \;
+  for patch in $CWD/fastjar-patches/*.gz ; do
+    zcat $patch | patch -p1 --verbose || exit 1
+  done
+  CFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS" \
+  ./configure \
+     --prefix=/usr \
+     --libdir=/usr/lib$LIBDIRSUFFIX \
+     --mandir=/usr/man \
+     --infodir=/usr/info \
+     --build=$TARGET
+  make $NUMJOBS || exit 1
+  make install DESTDIR=$PKG5 || exit 1
+  mkdir -p $PKG5/usr/doc/fastjar-$FASTJARVER
+  cp -a \
+    AUTHORS CHANGES COPYING* INSTALL NEWS README* TODO \
+    $PKG5/usr/doc/fastjar-$FASTJARVER
+  # If there's a ChangeLog, installing at least part of the recent history
+  # is useful, but don't let it get totally out of control:
+  if [ -r ChangeLog ]; then
+    DOCSDIR=$(echo $PKG5/usr/doc/fastjar-$FASTJARVER)
+    cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+    touch -r ChangeLog $DOCSDIR/ChangeLog
+  fi
+  find $PKG5 | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+    | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  # Compress and if needed symlink the man pages:
+  if [ -d $PKG5/usr/man ]; then
+    ( cd $PKG5/usr/man
+      for manpagedir in $(find . -type d -name "man*") ; do
+        ( cd $manpagedir
+          for eachpage in $( find . -type l -maxdepth 1) ; do
+            ln -s $( readlink $eachpage ).gz $eachpage.gz
+            rm $eachpage
+          done
+          gzip -9 *.?
+        )
+      done
+    )
+  fi
+  # Compress info files, if any:
+  if [ -d $PKG5/usr/info ]; then
+    ( cd $PKG5/usr/info
+      rm -f dir
+      gzip -9 *
+    )
+  fi
+  echo
+) || exit 1
+
+# build gcc
+( mkdir gcc.build.lnx;
+  cd gcc.build.lnx;
+
+  # If enough people need "treelang" support for it may be considered.
+  #  --enable-languages=ada,c,c++,fortran,java,objc,treelang
+  # I think it's incorrect to include this option (as it'll end up set
+  # to i586 on x86 platforms), and we want to tune the binary structure
+  # for i686, as that's where almost all of the optimization speedups
+  # are to be found.
+  # Correct me if my take on this is wrong.
+  #  --with-cpu=$ARCH 
+ 
+  if [ "$ARCH" != "x86_64" ]; then
+    GCC_ARCHOPTS="--with-arch=$ARCH"
+  else
+    GCC_ARCHOPTS="--enable-multilib"
+  fi
+ 
+  # NOTE:  For Slackware 15.0, look into removing --with-default-libstdcxx-abi=gcc4-compatible,
+  # which will then require rebuilding all C++ libraries.  That is, if there's any benefit.
+
+  CFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS" \
+  ../gcc-$VERSION/configure --prefix=/usr \
+     --libdir=/usr/lib$LIBDIRSUFFIX \
+     --mandir=/usr/man \
+     --infodir=/usr/info \
+     --enable-shared \
+     --enable-bootstrap \
+     --enable-languages=ada,c,c++,fortran,go,java,lto,objc \
+     --enable-threads=posix \
+     --enable-checking=release \
+     --enable-objc-gc \
+     --with-system-zlib \
+     --with-python-dir=/lib$LIBDIRSUFFIX/python2.7/site-packages \
+     --enable-libstdcxx-dual-abi \
+     --with-default-libstdcxx-abi=gcc4-compatible \
+     --disable-libunwind-exceptions \
+     --enable-__cxa_atexit \
+     --enable-libssp \
+     --enable-lto \
+     --disable-install-libiberty \
+     --with-gnu-ld \
+     --verbose \
+     --enable-java-home \
+     --with-java-home=/usr/lib$LIBDIRSUFFIX/jvm/jre \
+     --with-jvm-root-dir=/usr/lib$LIBDIRSUFFIX/jvm \
+     --with-jvm-jar-dir=/usr/lib$LIBDIRSUFFIX/jvm/jvm-exports \
+     --with-arch-directory=$LIB_ARCH \
+     --with-antlr-jar=$ANTLJAR \
+     --disable-gtktest \
+     $GCC_ARCHOPTS \
+     --target=${TARGET} \
+     --build=${TARGET} \
+     --host=${TARGET} || exit 1
+
+  # Start the build:
+
+  # Include all debugging info (for now):
+  make $NUMJOBS bootstrap;
+
+  ( cd gcc
+    make $NUMJOBS gnatlib GNATLIBCFLAGS="$SLKCFLAGS"
+    # This wants a shared -ladd2line?
+    #make gnatlib-shared
+    
+    CFLAGS="$SLKCFLAGS" \
+    CXXFLAGS="$SLKCFLAGS" \
+    make $NUMJOBS gnattools
+  )
+  make info
+
+  # Set GCCCHECK=something to run the tests
+  if [ ! -z $GCCCHECK ]; then
+    make $NUMJOBS check
+  fi
+
+  make install DESTDIR=$PKG1
+
+# KLUDGE ALERT
+# These *gdb.py files are causing ldconfig to complain, so they are going
+# to be REMOVED for now...  at some point, they might be moved somewhere
+# else, in which case things should Just Work(tm).  Keep an eye on it.
+rm -f $PKG1/usr/lib${LIBDIRSUFFIX}/*gdb.py
+
+# Be sure the "specs" file is installed.
+if [ ! -r $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${TARGET}/${VERSION}/specs ]; then
+  cat stage1-gcc/specs > $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${TARGET}/${VERSION}/specs
+fi
+
+# Make our 64bit gcc look for 32bit gcc binaries in ./32 subdirectory:
+if [ "$ARCH" = "x86_64" ]; then
+  sed -i 's#;.\(:../lib !m64 m32;\)$#;32\1#' \
+    $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/${TARGET}/${VERSION}/specs
+fi
+
+# Install liblto_plugin.so for binutils
+mkdir -p $PKG1/usr/lib/bfd-plugins
+ln -sf ../../libexec/gcc/${TARGET}/${VERSION}/liblto_plugin.so $PKG1/usr/lib/bfd-plugins/liblto_plugin.so
+
+#  make ada.install-common DESTDIR=$PKG1
+#  make install-gnatlib DESTDIR=$PKG1
+make -i install-info DESTDIR=$PKG1
+
+chmod 755 $PKG1/usr/lib${LIBDIRSUFFIX}/libgcc_s.so.1
+if [ "$ARCH" = "x86_64" ]; then
+  chmod 755 $PKG1/usr/lib/libgcc_s.so.1
+fi
+
+# The (huge) static GNU java libraries are not packaged.  In nearly all
+# cases one or more dependencies will not be available as static anyway.
+rm -f $PKG1/usr/lib${LIBDIRSUFFIX}/libgcj.a
+rm -f $PKG1/usr/lib${LIBDIRSUFFIX}/libgcj-tools.a
+if [ "$ARCH" = "x86_64" ]; then
+  rm -f $PKG1/usr/lib/libgcj.a
+  rm -f $PKG1/usr/lib/libgcj-tools.a
+fi
+
+# Fix stuff up:
+( cd $PKG1/usr/info ; rm dir ; gzip -9 * )
+( cd $PKG1
+  # *not* ${LIBDIRSUFFIX}
+  mkdir -p lib
+  cd lib
+  ln -sf /usr/bin/cpp .
+)
+
+( cd $PKG1/usr/bin
+  mv g++ g++-gcc-$VERSION
+  mv gcc gcc-$VERSION
+  mv ${TARGET}-gfortran gfortran-gcc-$VERSION
+  ln -sf g++-gcc-$VERSION g++
+  ln -sf gcc-$VERSION gcc
+  ln -sf g++ c++
+  ln -sf gcc cc
+  ln -sf gcc-$VERSION ${TARGET}-gcc
+  ln -sf gcc-$VERSION ${TARGET}-gcc-$VERSION
+  ln -sf gcc-ar ${TARGET}-gcc-ar
+  ln -sf gcc-nm ${TARGET}-gcc-nm
+  ln -sf gcc-ranlib ${TARGET}-gcc-ranlib
+  ln -sf gcj ${TARGET}-gcj
+  ln -sf gcjh ${TARGET}-gcjh
+  ln -sf g++-gcc-$VERSION ${TARGET}-c++
+  ln -sf g++-gcc-$VERSION ${TARGET}-g++
+  ln -sf gfortran-gcc-$VERSION gfortran
+  ln -sf gfortran-gcc-$VERSION ${TARGET}-gfortran
+  ln -sf gfortran-gcc-$VERSION ${TARGET}-gfortran-$VERSION
+  ln -sf gfortran-gcc-$VERSION ${TARGET}-g95
+  ln -sf gfortran g95
+  ln -sf gfortran f95
+  ln -sf gfortran-gcc-$VERSION ${TARGET}-g77
+  ln -sf gfortran g77
+  ln -sf gfortran f77
+  cat $CWD/c89.sh > c89
+  cat $CWD/c99.sh > c99
+  chmod 755 c89 c99
+)
+
+( cd $PKG1/usr/man
+  gzip -9 */*
+  cd man1
+  ln -sf g++.1.gz c++.1.gz
+  ln -sf gcc.1.gz cc.1.gz
+)  
+
+## build the txz package
+#(
+#  cd $PKG1;
+#  makepkg -l y -c n $TMP/gcc-$VERSION-$ARCH-$BUILD.txz
+#)
+# keep a log
+) 2>&1 | tee $TMP/gcc.build.log
+
+# OK, time to split the big package where needed:
+
+# gcc-g++:
+( cd $PKG2
+  mkdir -p usr/bin
+  mv $PKG1/usr/bin/*++* usr/bin
+  mkdir -p usr/include
+  mv $PKG1/usr/include/c++ usr/include
+  mkdir -p usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/*++* usr/lib${LIBDIRSUFFIX}
+  if [ "$ARCH" = "x86_64" ]; then
+    mkdir -p usr/lib
+    mv $PKG1/usr/lib/*++* usr/lib
+  fi
+  mkdir -p usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/cc1plus usr/libexec/gcc/$TARGET/$VERSION/cc1plus
+  mkdir -p usr/man/man1
+  mv $PKG1/usr/man/man1/*++* usr/man/man1
+)
+
+# gcc-gfortran:
+( cd $PKG3
+  mkdir -p usr/bin
+  mv $PKG1/usr/bin/*gfortran* usr/bin
+  mv $PKG1/usr/bin/*95* usr/bin
+  mv $PKG1/usr/bin/*77* usr/bin
+  # Doesn't this seem like a logical idea?
+  ( cd usr/bin ; ln -sf gfortran-gcc-${VERSION} fortran )
+  mkdir -p usr/info
+  mv $PKG1/usr/info/gfortran* usr/info
+  mkdir -p usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/libgfortran* usr/lib${LIBDIRSUFFIX}
+  if [ "$ARCH" = "x86_64" ]; then
+    mkdir -p usr/lib
+    mv $PKG1/usr/lib/libgfortran* usr/lib
+  fi
+  mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/finclude usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/libgfortran* usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION
+  if [ "$ARCH" = "x86_64" ]; then
+    mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32
+    mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32/finclude usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32
+    mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32/libgfortran* usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32
+  fi
+  mkdir -p usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/f951 usr/libexec/gcc/$TARGET/$VERSION/f951
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/libgfortran* usr/libexec/gcc/$TARGET/$VERSION
+  mkdir -p usr/man/man1
+  mv $PKG1/usr/man/man1/gfortran* usr/man/man1
+)
+
+# gcc-gnat:
+# First, relocate usr/bin/gnative2ascii to the gcc-java package so it
+# isn't matched and accidentally put in gcc-gnat:
+mkdir -p $PKG5/usr/bin
+mv $PKG1/usr/bin/gnative2ascii $PKG5/usr/bin
+# Now make the gcc-gnat package tree:
+( cd $PKG4
+  mkdir -p usr/bin
+  mv $PKG1/usr/bin/gnat* usr/bin
+  mv $PKG1/usr/bin/gpr* usr/bin
+  mkdir -p usr/info
+  mv $PKG1/usr/info/gnat* usr/info
+  mkdir -p usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/gnat1 usr/libexec/gcc/$TARGET/$VERSION
+  mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/adainclude usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/adalib usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION
+  if [ "$ARCH" = "x86_64" ]; then
+    mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32
+    mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32/adainclude usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32
+    mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32/adalib usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/32
+  fi
+)
+
+# gcc-java:
+( cd $PKG5
+  mkdir -p usr/bin
+  mv $PKG1/usr/bin/aot-compile usr/bin
+  mv $PKG1/usr/bin/addr2name.awk usr/bin
+  # mv $PKG1/usr/bin/fastjar usr/bin
+  mv $PKG1/usr/bin/gappletviewer usr/bin
+  mv $PKG1/usr/bin/gc-analyze usr/bin
+  mv $PKG1/usr/bin/*gcj* usr/bin
+  mv $PKG1/usr/bin/gij usr/bin
+  mv $PKG1/usr/bin/gjar usr/bin
+  mv $PKG1/usr/bin/gjarsigner usr/bin
+  mv $PKG1/usr/bin/gjdoc usr/bin
+  mv $PKG1/usr/bin/gkeytool usr/bin
+  mv $PKG1/usr/bin/grepjar usr/bin
+  mv $PKG1/usr/bin/grmid usr/bin
+  mv $PKG1/usr/bin/grmic usr/bin
+  mv $PKG1/usr/bin/grmiregistry usr/bin
+  mv $PKG1/usr/bin/gserialver usr/bin
+  mv $PKG1/usr/bin/gtnameserv usr/bin
+  mv $PKG1/usr/bin/gjavah usr/bin
+  mv $PKG1/usr/bin/gorbd usr/bin
+  mv $PKG1/usr/bin/jar usr/bin
+  mv $PKG1/usr/bin/jcf-dump usr/bin
+  mv $PKG1/usr/bin/jv-* usr/bin
+  mv $PKG1/usr/bin/rmi* usr/bin
+  mkdir -p usr/include/c++/$VERSION
+  # Move some Java only C++ headers from the C++ package:
+  mv $PKG2/usr/include/c++/$VERSION/{gcj,gnu,java,javax,org,sun} usr/include/c++/$VERSION
+  mv $PKG1/usr/include/ffi.h usr/include
+  mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jawt.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/ffi.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/ffitarget.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jawt_md.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jni.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jni_md.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/jvmpi.h usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/libffi usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  # aot-compile Python plugins:
+  if [ ! -d $PKG1/usr/lib${LIBDIRSUFFIX}/python2.7 ]; then
+    echo "NO $PKG1/usr/lib${LIBDIRSUFFIX}/python2.7 !"
+    exit 1
+  fi
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/python2.7 usr/lib${LIBDIRSUFFIX}
+  mkdir -p usr/info
+  mv $PKG1/usr/info/gcj.* usr/info
+  # mv $PKG1/usr/info/fastjar.* usr/info
+  mkdir -p usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/libffi* usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/logging.properties usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcj* usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/libgcj* usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/libgij* usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/lib-org* usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/security usr/lib${LIBDIRSUFFIX}
+  mkdir -p usr/lib${LIBDIRSUFFIX}/pkgconfig
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/pkgconfig/libgcj*.pc usr/lib${LIBDIRSUFFIX}/pkgconfig
+  rmdir $PKG1/usr/lib${LIBDIRSUFFIX}/pkgconfig 2> /dev/null
+  if [ "$ARCH" = "x86_64" ]; then
+    mkdir -p usr/lib
+    mv $PKG1/usr/lib/libffi* usr/lib
+    mv $PKG1/usr/lib/logging.properties usr/lib
+    mv $PKG1/usr/lib/gcj* usr/lib
+    mv $PKG1/usr/lib/libgcj* usr/lib
+    mv $PKG1/usr/lib/libgij* usr/lib
+    mv $PKG1/usr/lib/lib-org* usr/lib
+    mv $PKG1/usr/lib/security usr/lib
+    mkdir -p usr/lib/pkgconfig
+    mv $PKG1/usr/lib/pkgconfig/libgcj*.pc usr/lib/pkgconfig
+    rmdir $PKG1/usr/lib/pkgconfig 2> /dev/null
+  fi
+  mkdir -p usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/jc1 usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/ecj1 usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/jvgenmain usr/libexec/gcc/$TARGET/$VERSION
+  mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/gcj usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mkdir -p usr/man/man1
+  mv $PKG1/usr/man/man1/aot-compile.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gappletviewer.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gc-analyze.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gcj.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gcjh.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gcj-dbtool.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gij.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gjar.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gjarsigner.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gjavah.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gjdoc.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gjnih.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gkeytool.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gnative2ascii.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gorbd.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/grmic.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/grmid.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/grmiregistry.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gserialver.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gtnameserv.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/jcf-dump.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/jv-convert.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/jv-scan.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/rebuild-gcj-db.1.gz usr/man/man1
+  mkdir -p usr/man/man3
+  mv $PKG1/usr/man/man3/ffi* usr/man/man3
+  mkdir -p usr/share
+  mv $PKG1/usr/share/java usr/share
+  # The ecj wrapper script:
+  cat $CWD/ecj.sh | sed -e "s,@JAVADIR@,/usr/share/java," > usr/bin/ecj
+  chmod 755 usr/bin/ecj
+  # The JAVA_HOME compatibility links.
+  # Caution: non-multilib arch-independent stuff! No lib64 here.
+  mkdir -p usr/lib$LIBDIRSUFFIX
+  mv $PKG1/usr/lib$LIBDIRSUFFIX/jvm* usr/lib$LIBDIRSUFFIX
+  # And add the missing javac symlink:
+  ln -s ../../../bin/ecj usr/lib$LIBDIRSUFFIX/jvm/bin/javac
+  # Don't package libffi stuff anymore.  GCC will link the internal version
+  # statically, and we'll need a newer one elsewhere.
+  find . -name "ffi*.h" | xargs rm
+  find . -name "libffi*" | xargs rm
+  rm -f usr/man/man3/ffi*
+  rm -f usr/info/libffi*
+)
+
+# gcc-objc:
+( cd $PKG6
+  mkdir -p usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/libobjc* usr/lib${LIBDIRSUFFIX}
+  if [ "$ARCH" = "x86_64" ]; then
+    mkdir -p usr/lib
+    mv $PKG1/usr/lib/libobjc* usr/lib
+  fi
+  mkdir -p usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/cc1obj usr/libexec/gcc/$TARGET/$VERSION
+  mkdir -p usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include/objc usr/lib${LIBDIRSUFFIX}/gcc/$TARGET/$VERSION/include
+)
+
+## NOTE: Thought about this, because the precompiled headers are so large.
+## Probably easier to keep everything together, though.
+## gcc-g++-gch (precompiled c++ headers)
+#( cd $PKG7
+#  mkdir -p usr/include/c++/$VERSION/$TARGET/bits
+#  mv $PKG2/usr/include/c++/$VERSION/$TARGET/bits/stdc++.h.gch usr/include/c++/$VERSION/$TARGET/bits
+#)
+
+# gcc-go:
+( cd $PKG8
+  mkdir -p usr/bin
+  mv $PKG1/usr/bin/*gccgo* usr/bin
+  mv $PKG1/usr/bin/go{,fmt} usr/bin
+  mkdir -p usr/libexec/gcc/$TARGET/$VERSION
+  mv $PKG1/usr/libexec/gcc/$TARGET/$VERSION/{cgo,go1} usr/libexec/gcc/$TARGET/$VERSION
+  mkdir -p usr/info
+  mv $PKG1/usr/info/gccgo.info.gz usr/info
+  mkdir -p usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/go usr/lib${LIBDIRSUFFIX}
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/{libgo.la,libgo.so*,libgobegin.a,libgolibbegin.a,libnetgo.a} usr/lib${LIBDIRSUFFIX} || exit 1
+  # Ordinarily Slackware doesn't package static libraries, but in this case
+  # it is useful for deploying compiled binaries on machines that do not yet
+  # have libgo.so.0.0.0.
+  mv $PKG1/usr/lib${LIBDIRSUFFIX}/libgo.a usr/lib${LIBDIRSUFFIX}
+  if [ "$ARCH" = "x86_64" ]; then
+    mkdir -p usr/lib
+    mv $PKG1/usr/lib/go usr/lib
+    mv $PKG1/usr/lib/{libgo.la,libgo.so*,libgobegin.a,libgolibbegin.a,libnetgo.a} usr/lib || exit 1
+    # Ordinarily Slackware doesn't package static libraries, but in this case
+    # it is useful for deploying compiled binaries on machines that do not yet
+    # have libgo.so.0.0.0.
+    mv $PKG1/usr/lib/libgo.a usr/lib
+  fi
+  mkdir -p usr/man/man1
+  mv $PKG1/usr/man/man1/gccgo.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/go.1.gz usr/man/man1
+  mv $PKG1/usr/man/man1/gofmt.1.gz usr/man/man1
+) || exit 1
+
+# Filter all .la files (thanks much to Mark Post for the sed script):
+( cd $TMP
+  for file in $(find . -type f -name "*.la") ; do
+    cat $file | sed -e 's%-L/gcc-[[:graph:]]* % %g' > $TMP/tmp-la-file
+    cat $TMP/tmp-la-file > $file
+  done
+  rm $TMP/tmp-la-file
+)
+
+## Strip bloated binaries and libraries:
+for dir in $PKG{1,2,3,4,5,6,8}; do
+  ( cd $dir
+    find . -name "lib*so*" -exec strip --strip-unneeded "{}" \;
+    find . -name "lib*a" -exec strip -g "{}" \;
+    strip --strip-unneeded usr/bin/* 2> /dev/null
+    find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+    find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  )
+done
+
+( cd $PKG1
+  makepkg -l y -c n $TMP/gcc-$VERSION-$ARCH-$BUILD.txz )
+( cd $PKG2
+  makepkg -l y -c n $TMP/gcc-g++-$VERSION-$ARCH-$BUILD.txz )
+( cd $PKG3
+  makepkg -l y -c n $TMP/gcc-gfortran-$VERSION-$ARCH-$BUILD.txz )
+( cd $PKG4
+  makepkg -l y -c n $TMP/gcc-gnat-$VERSION-$ARCH-$BUILD.txz )
+( cd $PKG5
+  makepkg -l y -c n $TMP/gcc-java-$VERSION-$ARCH-$BUILD.txz )
+( cd $PKG6
+  makepkg -l y -c n $TMP/gcc-objc-$VERSION-$ARCH-$BUILD.txz )
+#( cd $PKG7
+#  makepkg -l y -c n $TMP/gcc-g++-gch-$VERSION-$ARCH-$BUILD.txz )
+( cd $PKG8
+  makepkg -l y -c n $TMP/gcc-go-$VERSION-$ARCH-$BUILD.txz )
+
+echo
+echo "Slackware GCC package build complete!"
+echo
+
--- a/isl-0.18.tar.xz
+++ b/isl-0.18.tar.xz
--- a/readme.txt
+++ b/readme.txt
@ -1,15 +0,0 @@
-This repo contains all my slackware modifications of the base install.
-Additional packages are contained in RocketLinux and built in a non-standard manner.
-
-This branch contains a few scripts I use, related to slackware.
-
- kernel.SlackBuild is capable of building a near-identical slackware kernel
- convert32pkg.sh converts a 32bit package to be installable on 64bit (by
-   removing everything present in the 64bit package).
-  It is only designed to support some packages in the official slackware iso,
-   because there's all kinds of packages that need special treatment,
-   especially for their doinst.sh scripts.
- massconvert32.sh calls convert32pkg.sh over an entire package directory
- update-repo.sh is my shitty implementation of a slackware repo generator,
-   that tries to generate everything as close to the official slackware repo as
-   possible.
--- a/slack-desc.gcc
+++ b/slack-desc.gcc
@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+   |-----handy-ruler------------------------------------------------------|
+gcc: gcc (Base GCC package with C support)
+gcc:
+gcc: GCC is the GNU Compiler Collection.
+gcc:
+gcc: This package contains those parts of the compiler collection needed to
+gcc: compile C code.  Other packages add Ada, C++, Fortran, Go,
+gcc: Objective-C, and Java support to the compiler core.
+gcc:
+gcc:
+gcc:
+gcc:
--- a/slack-desc.gcc-g++
+++ b/slack-desc.gcc-g++
@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+gcc-g++: gcc-g++ (C++ for GCC)
+gcc-g++:
+gcc-g++: C++ support for the GNU Compiler Collection.
+gcc-g++:
+gcc-g++: This package contains those parts of the compiler collection needed to
+gcc-g++: compile C++ code.  The base gcc package is also required.
+gcc-g++:
+gcc-g++:
+gcc-g++:
+gcc-g++:
+gcc-g++:
--- a/slack-desc.gcc-gfortran
+++ b/slack-desc.gcc-gfortran
@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+gcc-gfortran: gcc-gfortran (Fortran support for GCC)
+gcc-gfortran:
+gcc-gfortran: The GNU Fortran compiler is fully compliant with the Fortran 95
+gcc-gfortran: Standard and includes legacy F77 support.  In addition, a significant
+gcc-gfortran: number of Fortran 2003 and Fortran 2008 features are implemented.
+gcc-gfortran: GNU Fortran also contains many standard and extensions and can be
+gcc-gfortran: used to run real-world programs.
+gcc-gfortran:
+gcc-gfortran: This package contains those parts of the compiler collection
+gcc-gfortran: needed to compile Fortran code.  The gcc package is also required.
+gcc-gfortran:
--- a/slack-desc.gcc-gnat
+++ b/slack-desc.gcc-gnat
@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+gcc-gnat: gcc-gnat (Ada support for GCC)
+gcc-gnat:
+gcc-gnat: Ada support for the GNU Compiler Collection.
+gcc-gnat:
+gcc-gnat: This package contains those parts of the compiler collection needed to
+gcc-gnat: compile Ada code.  GNAT implements Ada 95, Ada 2005 and Ada 2012, and
+gcc-gnat: it may also be invoked in Ada 83 compatibility mode.  By default, GNAT
+gcc-gnat: assumes Ada 2012.  The base gcc package is also required.
+gcc-gnat:
+gcc-gnat:
+gcc-gnat:
--- a/slack-desc.gcc-go
+++ b/slack-desc.gcc-go
@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+gcc-go: gcc-go (Go support for GCC)
+gcc-go:
+gcc-go: Go is a compiled, garbage-collected, concurrent programming language
+gcc-go: developed by Google Inc.  The initial design of Go was started in
+gcc-go: September 2007 by Robert Griesemer, Rob Pike, and Ken Thompson.
+gcc-go: Rob Pike has stated that Go is being used "for real stuff" at Google.
+gcc-go: Go's "gc" compiler targets the Linux, Mac OS X, FreeBSD, OpenBSD and
+gcc-go: Microsoft Windows operating systems, and the i386, amd64, and ARM
+gcc-go: processor architectures.
+gcc-go:
+gcc-go: Homepage:  http://golang.org
--- a/slack-desc.gcc-java
+++ b/slack-desc.gcc-java
@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+gcc-java: gcc-java (Java support for GCC)
+gcc-java:
+gcc-java: Java support for the GNU Compiler Collection.
+gcc-java:
+gcc-java: This package contains those parts of the compiler collection needed to
+gcc-java: compile programs written in the Java programming language.  The base
+gcc-java: gcc package is also required.
+gcc-java:
+gcc-java:
+gcc-java:
+gcc-java:
--- a/slack-desc.gcc-objc
+++ b/slack-desc.gcc-objc
@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+gcc-objc: gcc-objc (Objective-C support for GCC)
+gcc-objc:
+gcc-objc: Objective-C support for the GNU Compiler Collection.
+gcc-objc:
+gcc-objc: This package contains those parts of the compiler collection needed to
+gcc-objc: compile code written in Objective-C.  Objective-C was originally
+gcc-objc: developed to add object-oriented extensions to the C language, and is
+gcc-objc: best known as the native language of the NeXT computer.
+gcc-objc:
+gcc-objc: The base gcc package is also required.
+gcc-objc: