Tons of changes

Maintaining this large an amount of satellites is hard. Moved most of them to the graveyard until I need them again, in which case I'll just move them back.

astronaut/astronaut

@@ -63,6 +63,7 @@ _download_only=false
 _vcs_only=false
 vcs_compile=false
 unset _user_options  # Options specified in the command line get the highest priority
+unset _sat_options  # Options defined by the satellite
 #_nuke_dir_install (This can be set from wrappers)
 
 # Should be specified in the satellite
@@ -211,10 +212,9 @@ option() {
     local negate=false
     local variable=false
     case "$check" in
-        *=*)
+        =*)
             local variable=true
-            local default="$(echo "$check" | cut -d '=' -f 2)"
+            local check="$(echo "$check" | cut -c 2-)"
-            local check="$(echo "$check" | cut -d '=' -f 1)"
             ;;
         !*)
             local negate=true
@@ -223,34 +223,44 @@ option() {
     esac
 
     local enabled=false
+    local found=false
     local opt
     local IFS=','
     for option in $options; do
         local option_negate=false
+        local option_variable=false
         case "$option" in
             *=*)
                 local value="$(echo "$option" | cut -d '=' -f 2)"
                 local option="$(echo "$option" | cut -d '=' -f 1)"
+                local option_variable=true
                 ;;
             !*)
                 local option="$(echo "$option" | cut -c 2-)"
                 local option_negate=true
+                ;;
         esac
 
         if [ "$option" = "$check" ]; then
+            if [ "$variable" = true -a "$option_variable" = false ]; then
+                _msg 'Tip: Define the option as option=value.'
+                _exiterr "Satellite requested a variable option, but there was no value for option: '$option'."
+            fi
+
             [ "$option_negate" = true ] && local enabled=false || local enabled=true
+            local found=true
             break
         fi
     done
 
+    if [ "$found" = false ]; then
+        _msg 'Tip: Make sure to define every option you use in the satellite.'
+        _exiterr "Option '$check' was nowhere to be found."
+    fi
+
     if [ "$variable" = true ]; then
-        if [ "$enabled" = true ]; then
+        echo "$value"
-            echo "$value"
+        return
-            return
-        else
-            echo "$default"
-            return
-        fi
     fi
 
     if [ "$negate" = true ]; then
@@ -267,6 +277,11 @@ option() {
     fi
 }
 
+define_option() {
+    local option="$(echo "$1" | cut -d ':' -f 1)"
+    options="$options,$option"
+}
+
 import() {
     . "$(dirname "$_satellite")/functions/$1.sh"
 }
@@ -311,7 +326,7 @@ fi
 
 _satellite="$(realpath "$_satellite")"
 
-# Build the definitive options list
+# Build the definitive options list (not including the options defined in the satellite)
 options="$_user_options$(package_options "$_satname"),$options"
 
 # Create the directories

astronaut/astronaut.sat

@@ -1,29 +1,34 @@
 name=astronaut
 version=$(date +%Y%m%d)
 
-extrafile "astronaut"
+define_option '!helpers: Enable installation of helper scripts'
+define_option '!xbps: Enable installation of the xbps-astronaut wrapper'
+define_option '!pacman: Enable installation of the pacman-astronaut wrapper'
+define_option '!pkgtools: Enable installation of the astronautpkg wrapper'
+
+extrafile 'astronaut'
 
 if option helpers; then
-    extrafile "astrohelp"
+    extrafile 'astrohelp'
-    extrafile "freshnaut"
+    extrafile 'freshnaut'
 fi
 
-option xbps extrafile "xbps-astronaut"
+option xbps extrafile 'xbps-astronaut'
-option pacman extrafile "pacman-astronaut"
+option pacman extrafile 'pacman-astronaut'
-option pkgtools extrafile "astronautpkg"
+option pkgtools extrafile 'astronautpkg'
 header_end
 
-install -D "astronaut" "$dir_install/$dir_prefix/bin/astronaut"
+install -D 'astronaut' "$dir_install/$dir_prefix/bin/astronaut"
 
 # Optional helper tools
 if option helpers; then
-    install -D "astrohelp" "$dir_install/$dir_prefix/bin/astrohelp"
+    install -D 'astrohelp' "$dir_install/$dir_prefix/bin/astrohelp"
-    install -D "freshnaut" "$dir_install/$dir_prefix/bin/freshnaut"
+    install -D 'freshnaut' "$dir_install/$dir_prefix/bin/freshnaut"
 fi
 
 # Wrappers for specific package managers
-option xbps install -D "xbps-astronaut" "$dir_install/$dir_prefix/bin/xbps-astronaut"
+option xbps install -D 'xbps-astronaut' "$dir_install/$dir_prefix/bin/xbps-astronaut"
-option pacman install -D "pacman-astronaut" "$dir_install/$dir_prefix/bin/pacman-astronaut"
+option pacman install -D 'pacman-astronaut' "$dir_install/$dir_prefix/bin/pacman-astronaut"
-option pkgtools install -D "astronautpkg" "$dir_install/$dir_prefix/bin/astronautpkg"
+option pkgtools install -D 'astronautpkg' "$dir_install/$dir_prefix/bin/astronautpkg"
 
 # vim:set tabstop=4 shiftwidth=4 syntax=sh et:

astronaut/examples/functions/say_hello.sh

@@ -2,6 +2,6 @@
 
 # You define a function here, and it becomes available in any script that imports it.
 say_hello() {
-    local tmp="Hello, there!"
+    local tmp='Hello, there!'
     echo "Function ran! $tmp"
 }

astronaut/examples/hello.sat

@@ -16,9 +16,15 @@ update_names="$name-$version.tar.gz"  # Specify what the lines containing the ve
                                       #   as another program will look for any different versions on the same page.
                                       # You may not need to set this, in which case the program will try to guess it from the download commands.
 
-vcs_compile=true  # Set this to true if it's a vcs package, and we've just downloaded an update for it. This is meant to be used in functions/header_end hooks, and has to be set before header_end is called (or by a header_end hook).
+vcs_compile=true  # Set this to true if it's a vcs package, and we've just downloaded an update for it. This is meant to be used in functions, and has to be set before header_end is called.
 
-# Please note that setting the above info from an imported script is supported, as long as it's done in the header.
+# Define options used in this satellite.
+define_option '!check: Enable the testsuite.'  # Due to the '!' at the start, check is false by default.
+define_option 'test=Default value'  # It is also allowed to provide no description
+# You should define every option used in your satellite.
+# See lower for info on how to use these options.
+
+# Please note that setting the above info in an imported script is supported, as long as it's done in the header.
 
 # Astronaut will generally prefix internal variables with "_". There are, however, a few exceptions.
 #   Some of those you can touch, some not.
@@ -61,35 +67,33 @@ header_end # End of the header.
 # - dlfile
 # - extrafile
 # - import
+# - define_option
 # getfile and extract are technically allowed, but not encouraged.
 # Basically, do not use anything that touches dir_build or dir_install or does anything other than fetching the required files.
 # The same rule above applies for imported commands.
 
 # Name [REQUIRED], Destination, Custom command
 extract "$name-$version.tar.gz" \
-        "." \
+        '.' \
-        "tar xvfC {src} {dst}"
+        'tar xvfC {src} {dst}'
 
 # Copy some file you downloaded over to the build directory.
 #getfile "Waffles.txt"
 
 # Compilation instructions
 cd "$name-$version"
-./configure --prefix="$dir_prefix"
+./configure --prefix="/$dir_prefix"
 make
 
 # Know if the user wants the package to be checked
 # Check if an option is disabled
-if option !no_check; then
+if option check; then
     make check
 fi
 # Abbreviation of the above
-option test echo "Test option enabled"
+#option check make check
 # Bangs ("!") negate the operation.
-#option !test echo "Test option disabled"
+#option !check echo "The package wasn't checked"
-
-# Options with arguments.
-echo "Value of option test2 = $(option "test2=default value")"
 
 make DESTDIR="$dir_install" install
 rm "$dir_install/$dir_prefix/share/info/dir"  # This file collides with some other packages.
@@ -97,8 +101,11 @@ rm "$dir_install/$dir_prefix/share/info/dir"  # This file collides with some oth
 # Call the function we imported. For more info see the top of the file, and functions/say_hello.sh
 say_hello
 
+# Options with values.
+echo "Value of option test = $(option =test)"
+
 # Misc functions:
 #safe_sed 'oh/i/hope\i\canuse%&thisinsed'
-# Escapes all the necessary characters to be able to use it in a regular sed command
+# Escapes all the necessary characters to be able to use an arbitrary string in a regular sed command
 
 # vim:set tabstop=4 shiftwidth=4 syntax=sh et:

astronaut/examples/template.sat → astronaut/template.sat

@@ -4,15 +4,17 @@ name=hello
 version=2.10
 update_url="https://ftp.gnu.org/gnu/$name/"
 
+define_option '!check: Enable the testsuite.'
+
 dlextract "https://ftp.gnu.org/gnu/$name/$name-$version.tar.gz" \
           "6cd0ffea3884a4e79330338dcc2987d6"
 header_end
 
 cd "$name-$version"
 
-./configure --prefix="$dir_prefix"
+./configure --prefix="/$dir_prefix"
 make
-option !no_check make check
+option check make check
 make DESTDIR="$dir_install" install
 rm -f "$dir_install/$dir_prefix/share/info/dir"  # This file collides with some other packages.
 

satellites/3dsfat16tool.sat → graveyard/unmaintained_satellites/3dsfat16tool.sat

@@ -3,7 +3,8 @@ version=3.2
 update_url="https://github.com/d0k3/$name/releases"
 update_names="v$version.tar.gz"
 
-dlextract "https://github.com/d0k3/$name/archive/v$version.tar.gz"
+dlextract "https://github.com/d0k3/$name/archive/v$version.tar.gz" \
+          'c4a2a0d4e8eed7b882ea090ccdb2e929'
 header_end
 
 cd "$name-$version"

satellites/broadcom-wl.sat → graveyard/unmaintained_satellites/broadcom-wl.sat

@@ -2,21 +2,28 @@ name=broadcom-wl
 version=6_30_223_271
 update_url="https://aur.archlinux.org/packages/$name-dkms/"
 
+define_option "kver=$(uname -r): The kernel version we're building for."
+
 dlextract "http://www.broadcom.com/docs/linux_sta/hybrid-v35_64-nodebug-pcoem-$version.tar.gz" \
-          "115903050c41d466161784d4c843f4f9"
+          '115903050c41d466161784d4c843f4f9'
 dlfile "https://aur.archlinux.org/cgit/aur.git/plain/$name-dkms.conf?h=$name-dkms" \
-       "b6e8ae4cf217bf68dcf08599bf43fce4"
+       'b6e8ae4cf217bf68dcf08599bf43fce4'
 dlfile "https://aur.archlinux.org/cgit/aur.git/plain/001-null-pointer-fix.patch?h=$name-dkms" \
-       "fabbf528164f5e3a9dcf46f46a678f86"
+       'fabbf528164f5e3a9dcf46f46a678f86'
 dlfile "https://aur.archlinux.org/cgit/aur.git/plain/002-rdtscl.patch?h=$name-dkms" \
-       "76c168a0271cb57d2539a10877979fbd"
+       '76c168a0271cb57d2539a10877979fbd'
+dlfile "https://aur.archlinux.org/cgit/aur.git/plain/003-linux47.patch?h=$name-dkms" \
+       'c5074307a37698b11780237beb8f52b2'
 header_end
 
-sed -i -e "/BRCM_WLAN_IFNAME/s:eth:wlan:" src/wl/sys/wl_linux.c
+kver="$(option =kver)"
+
+sed -i -e '/BRCM_WLAN_IFNAME/s:eth:wlan:' src/wl/sys/wl_linux.c
 patch -p1 -i 001-null-pointer-fix.patch
 patch -p1 -i 002-rdtscl.patch
-make KBUILD_DIR="$dir_sysroot/lib/modules/$(uname -r)/build"
+patch -p1 -i 003-linux47.patch
-install -Dm 644 "wl.ko" "$dir_install/lib/modules/$(uname -r)/kernel/drivers/net/wireless/wl.ko"
+make KBUILD_DIR="$dir_sysroot/lib/modules/$kver/build"
+install -Dm 644 "wl.ko" "$dir_install/lib/modules/$kver/kernel/drivers/net/wireless/wl.ko"
 install -Dm 644 "$name-dkms.conf" "$dir_install/etc/modprobe.d/$name.conf"
 
 # vim:set tabstop=4 shiftwidth=4 syntax=sh et:

satellites/ctrtool.sat → graveyard/unmaintained_satellites/ctrtool.sat

@@ -4,7 +4,7 @@ update_url="https://github.com/profi200/$name/releases"
 update_names="archive/$version.tar.gz"
 
 dlextract "https://github.com/profi200/$name/archive/$version.tar.gz" \
-          "ff68864fade3dd822850180076a08357"
+          'ff68864fade3dd822850180076a08357'
 header_end
 
 cd "$name-$version/ctrtool"

satellites/heimdall.sat → graveyard/unmaintained_satellites/heimdall.sat

@@ -1,11 +1,11 @@
-import "compile/configure"
+import 'compile/configure'
 
 name=Heimdall
 version=1.4.1
 update_url="https://github.com/Benjamin-Dobell/$name/releases"
 
 dlextract "https://github.com/Benjamin-Dobell/$name/archive/v$version.tar.gz" \
-          "22c911e9042f5ed8fd90cbeeb9589015"
+          '22c911e9042f5ed8fd90cbeeb9589015'
 header_end
 
 cd "$name-$version/libpit"

satellites/include-what-you-use.sat → graveyard/unmaintained_satellites/include-what-you-use.sat

@@ -1,11 +1,11 @@
-import "compile/cmake"
+import 'compile/cmake'
 
 name=include-what-you-use
 version=0.6
 update_url="http://include-what-you-use.org/downloads/"
 
 dlextract "http://include-what-you-use.org/downloads/$name-$version.src.tar.gz" \
-          "e4dffc7c2396f0e3f2b7499c077325b5"
+          'e4dffc7c2396f0e3f2b7499c077325b5'
 header_end
 
 cd "$name"

satellites/fakeroot.sat

@@ -1,20 +1,18 @@
-import "compile/configure"
+import 'compile/configure'
-
-# TODO: Can't get 1.21 to install properly
 
 name=fakeroot
-#version=1.21
+version=1.21
-version=1.20.2
 update_url="http://http.debian.net/debian/pool/main/f/$name/"
 
-#dlextract "http://http.debian.net/debian/pool/main/f/$name/${name}_$version.orig.tar.gz" \
+dlextract "http://http.debian.net/debian/pool/main/f/$name/${name}_$version.orig.tar.gz" \
-          #"be5c9a0e516869fca4a6758105968e5a"
+          'be5c9a0e516869fca4a6758105968e5a'
-dlextract "http://http.debian.net/debian/pool/main/f/$name/${name}_$version.orig.tar.bz2" \
-          "a4b4564a75024aa96c86e4d1017ac786"
 header_end
 
-cd "$name-$version"
+cd "$name-$version/doc"
-#./bootstrap
+po4a -k 0 --rm-backups --variable 'srcdir=../doc/' po4a/po4a.cfg
+cd ..
+
+./bootstrap
 compile_configure --disable-static
 
 # vim:set tabstop=4 shiftwidth=4 syntax=sh et:

satellites/functions/compile/configure.sh

@@ -2,15 +2,15 @@ compile_configure() {
     ./configure \
         --prefix="/$dir_prefix" \
         --sysconfdir="/$dir_sysconfdir" \
-        --bindir="$dir_prefix/$dir_bindir" \
+        --bindir="/$dir_prefix/$dir_bindir" \
-        --sbindir="$dir_prefix/$dir_sbindir" \
+        --sbindir="/$dir_prefix/$dir_sbindir" \
-        --libdir="$dir_prefix/$dir_libdir" \
+        --libdir="/$dir_prefix/$dir_libdir" \
-        --libexecdir="$dir_prefix/$dir_libexecdir" \
+        --libexecdir="/$dir_prefix/$dir_libexecdir" \
-        --datadir="$dir_prefix/$dir_datadir" \
+        --datadir="/$dir_prefix/$dir_datadir" \
-        --mandir="$dir_prefix/$dir_mandir" \
+        --mandir="/$dir_prefix/$dir_mandir" \
-        --docdir="$dir_prefix/$dir_docdir/$name" \
+        --docdir="/$dir_prefix/$dir_docdir/$name" \
-        --infodir="$dir_prefix/$dir_infodir" \
+        --infodir="/$dir_prefix/$dir_infodir" \
-        --localedir="$dir_prefix/$dir_localedir" \
+        --localedir="/$dir_prefix/$dir_localedir" \
         $@
     make
     make DESTDIR="$dir_install/" install

satellites/functions/compile/qt5source.sh

@@ -0,0 +1,15 @@
+compile_qt5source() {
+    ./configure -v -confirm-license -opensource \
+        -prefix "/$dir_prefix" \
+        -libdir "/$dir_prefix/$dir_libdir" \
+        -headerdir "/$dir_prefix/include/qt5" \
+        -sysconfdir "/$dir_sysconfdir/xdg" \
+        -datadir "/$dir_prefix/$dir_datadir/qt5" \
+        -bindir "/$dir_prefix/$dir_libdir/qt5/bin" \
+        -archdatadir "/$dir_prefix/$dir_libdir/qt5" \
+        -docdir "/$dir_prefix/$dir_docdir/qt5" \
+        -examplesdir "/$dir_prefix/$dir_docdir/qt5/examples" \
+        $@
+    make
+    make INSTALL_ROOT="$dir_install" install
+}

satellites/libxkbcommon.sat

@@ -0,0 +1,14 @@
+import 'compile/configure'
+
+name=libxkbcommon
+version=0.6.1
+update_url='http://xkbcommon.org/'
+
+dlextract "http://xkbcommon.org/download/$name-$version.tar.xz" \
+          '67a8f322b5fa32352272e811bb90dd73'
+header_end
+
+cd "$name-$version"
+compile_configure --disable-static
+
+# vim:set tabstop=4 shiftwidth=4 syntax=sh et:

satellites/lua.sat

@@ -1,3 +1,5 @@
+# TODO: Install shared library, remove static library.
+
 name=lua
 majver=5.3
 version=$majver.3

satellites/nxengine.sat

@@ -1,21 +1,24 @@
 name=nxengine
 version=1006
-update_url="http://nxengine.sourceforge.net/"
+update_url='http://nxengine.sourceforge.net/'
+
+define_option 'dir_runtime=$HOME/.nxengine: The directory used to store the nxengine configuration and save files.'
+define_option 'console_key=`: The key used to access the debug console.'
 
 dlextract "http://nxengine.sourceforge.net/dl/nx-src-$version.tar.bz2" \
-          "cc0d1f5608bba70df86a6f5a3b4dd3bd"
+          'cc0d1f5608bba70df86a6f5a3b4dd3bd'
 download "http://www.cavestory.org/downloads/cavestoryen.zip" \
-         "5aad47f1cb72185d6e7f4c8c392f6b6e"
+         '5aad47f1cb72185d6e7f4c8c392f6b6e'
 
-extrafile "nxengine.sh"
+extrafile 'nxengine.sh'
-extrafile "nxengine.desktop"
+extrafile 'nxengine.desktop'
-extrafile "nxengine.png"
+extrafile 'nxengine.png'
 header_end
 
-extract "cavestoryen.zip" '' "unzip -qd {dst} {src}"
+extract 'cavestoryen.zip' '' 'unzip -qd {dst} {src}'
 
 # Some keyboards don't have an accessible backtick.
-console_key="$(safe_sed $(option console_key=\`))"
+console_key="$(safe_sed $(option =console_key))"
 sed -i -e "s/\`/$console_key/" nx/input.cpp
 sed -i -e "s/\`/$console_key/" nx/console.cpp
 
@@ -35,7 +38,7 @@ cp -r CaveStory/data "$dir_install/$dir_prefix/share/nxengine/data"
 
 # Install the run script
 # Where the files will be copied to on runtime.
-dir_runtime="$(option dir_runtime=\$HOME/.nxengine)"
+dir_runtime="$(option =dir_runtime)"
 sed -i -e "s/%PREFIX%/$(safe_sed "$dir_prefix")/" \
        -e "s/%RUNTIME%/$(safe_sed "$dir_runtime")/" \
        -e "s/%LIBDIR%/$(safe_sed "$dir_libdir")/" \

satellites/qt5-base.sat

@@ -0,0 +1,42 @@
+import 'compile/qt5source'
+
+name=qt5
+majver=5.7
+version=$majver.0
+
+optional_libraries='libpng libjpeg doubleconversion freetype harfbuzz'
+for opt in $optional_libraries; do
+    define_option "$opt: Enable support for $opt."
+done
+
+dlextract "http://download.qt.io/official_releases/qt/$majver/$version/submodules/qtbase-opensource-src-$version.tar.xz" \
+          '184f9460b40752d71b15b827260580c2'
+header_end
+
+cd "qtbase-opensource-src-$version"
+
+# Build using custom CFLAGS, CXXFLAGS and LDFLAGS (Shamelessly stolen from ArchLinux)
+sed -i -e "s/^\(QMAKE_CFLAGS_RELEASE.*\)/\1 $(safe_sed "$CFLAGS")/" mkspecs/common/gcc-base.conf
+sed -i -e "s/^\(QMAKE_CXXFLAGS_RELEASE.*\)/\1 $(safe_sed "$CXXFLAGS")/" mkspecs/common/gcc-base.conf
+sed -i -e "s/^\(QMAKE_LFLAGS_RELEASE.*\)/\1 $(safe_sed "$LDFLAGS")/" mkspecs/common/g++-unix.conf
+
+optional=""
+for opt in $optional_libraries; do
+    option $opt && optional="$optional -system-$opt" || optional="$optional -no-$opt"
+done
+
+echo "$optional"
+
+# Make sure all the possible libraries are linked from the OS, as Qt might use it's own if they aren't available.
+compile_qt5source \
+    -system-sqlite \
+    -system-zlib \
+    -system-pcre \
+    -system-xcb \
+    -system-xkbcommon-x11 \
+    -openssl-linked \
+    -dbus-linked \
+    -nomake examples \
+    $optional
+
+# vim:set tabstop=4 shiftwidth=4 syntax=sh et:

satellites/vcs/functions

@@ -1 +0,0 @@
-../functions

satellites/volumeicon.sat

@@ -1,14 +1,15 @@
-import "compile/configure"
+import 'compile/configure'
 
 name=volumeicon
 version=0.5.1
-update_url="http://softwarebakery.com/maato/$name.html"
+update_url="http://nullwise.com/$name.html"
 
-dlextract "http://softwarebakery.com/maato/files/$name/$name-$version.tar.gz" \
+dlextract "http://nullwise.com/files/$name/$name-$version.tar.gz" \
-          "48230f3a1843fa4cc4ec97d0da35c3f5"
+          '48230f3a1843fa4cc4ec97d0da35c3f5'
 header_end
 
 cd "$name-$version"
+sed -i -e 's/-DCOMPILEWITH_NOTIFY/ &/' ./configure
 compile_configure --enable-notify
 
 # vim:set tabstop=4 shiftwidth=4 syntax=sh et: