diff --git a/etc/rc.d/rc.S b/etc/rc.d/rc.S
new file mode 100644
index 0000000..4af65ef
--- /dev/null
+++ b/etc/rc.d/rc.S
@@ -0,0 +1,444 @@
+#!/bin/sh
+#
+# /etc/rc.d/rc.S:  System initialization script.
+#
+# Mostly written by:  Patrick J. Volkerding, <volkerdi@slackware.com>
+#
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+# Try to mount /proc:
+/sbin/mount -v proc /proc -n -t proc 2> /dev/null
+
+# Mount sysfs next, if the kernel supports it:
+if [ -d /sys ]; then
+  if grep -wq sysfs /proc/filesystems ; then
+    if ! grep -wq sysfs /proc/mounts ; then
+      /sbin/mount -v sysfs /sys -n -t sysfs
+    fi
+  fi
+fi
+
+# If /run exists, mount a tmpfs on it (unless the
+# initrd has already done so):
+if [ -d /run ]; then
+  if ! grep -wq "tmpfs /run tmpfs" /proc/mounts ; then
+    /sbin/mount -v -n -t tmpfs tmpfs /run -o mode=0755
+  fi
+fi
+
+# Load the loop device kernel module:
+if [ -x /etc/rc.d/rc.loop ]; then
+  . /etc/rc.d/rc.loop start
+fi
+
+# Initialize udev to manage /dev entries and hotplugging.
+# You may turn off udev by making the /etc/rc.d/rc.udev file non-executable
+# or giving the "nohotplug" option at boot, but realize that if you turn off
+# udev that you will have to load all the kernel modules that you need
+# yourself (possibly in /etc/rc.d/rc.modules.local), and make any additional
+# device nodes that you need in the /dev directory.  Even USB and IEEE1394
+# devices will need to have the modules loaded by hand if udev is not used.
+# So use it.  :-)
+if grep -wq sysfs /proc/mounts && grep -q devtmpfs /proc/filesystems ; then
+  if ! grep -wq nohotplug /proc/cmdline ; then
+    if [ -x /etc/rc.d/rc.udev ]; then
+      /bin/sh /etc/rc.d/rc.udev start
+    fi
+  fi
+fi
+
+# Mount Control Groups filesystem interface:
+if grep -wq cgroup /proc/filesystems ; then
+  if [ -d /sys/fs/cgroup ]; then
+    # See linux-*/Documentation/cgroups/cgroups.txt (section 1.6)
+    # Check if we have some tools to autodetect the available cgroup controllers
+    if [ -x /bin/cut -a -x /bin/tail ]; then
+      # Mount a tmpfs as the cgroup filesystem root
+      mount -t tmpfs -o mode=0755 cgroup_root /sys/fs/cgroup
+      # Autodetect available controllers and mount them in subfolders
+      controllers="$(/bin/cut -f 1 /proc/cgroups | /bin/tail -n +2)"
+      for i in $controllers; do
+        mkdir /sys/fs/cgroup/$i
+        mount -t cgroup -o $i $i /sys/fs/cgroup/$i
+      done
+      unset i controllers
+    else
+      # We can't use autodetection so fall back mounting them all together
+      mount -t cgroup cgroup /sys/fs/cgroup
+    fi
+  else
+    mkdir -p /dev/cgroup
+    mount -t cgroup cgroup /dev/cgroup
+  fi
+fi
+
+
+# Initialize the Logical Volume Manager.
+# This won't start unless we find /etc/lvmtab (LVM1) or
+# /etc/lvm/backup/ (LVM2).  This is created by /sbin/vgscan, so to
+# use LVM you must run /sbin/vgscan yourself the first time (and
+# create some VGs and LVs).
+# Create LVM lock/run directories:
+mkdir -p -m 0700 /run/lvm /run/lock /run/lock/lvm
+if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
+  echo "Initializing LVM (Logical Volume Manager):"
+  # Check for device-mapper support.
+  if ! grep -wq device-mapper /proc/devices ; then
+    # Try to load a device-mapper kernel module:
+    /sbin/modprobe -q dm-mod
+  fi
+  # Scan for new volume groups:
+  /sbin/vgscan --mknodes --ignorelockingfailure 2> /dev/null
+  if [ $? = 0 ]; then
+    # Make volume groups available to the kernel.
+    # This should also make logical volumes available.
+    /sbin/vgchange -ay --ignorelockingfailure
+  fi
+fi
+
+# Open any volumes created by cryptsetup.
+#
+# Some notes on /etc/crypttab in Slackware:
+# Only LUKS formatted volumes are supported (except for swap)
+# crypttab follows the following format:
+# <luks_name> <device> <password> <options>
+#
+# <luks_name>:  This is the name of your LUKS volume.
+# For example:  crypt-home
+#
+# <device>:  This is the device containing your LUKS volume.
+# For example:  /dev/sda2
+#
+# <password>:  This is either the volume password in plain text, or the name of
+# a key file.  Use 'none' to interactively enter password on boot.
+#
+# <options>:  Comma-separated list of options.  Note that there must be a
+# password field for any options to be picked up (use a password of 'none' to
+# get a password prompt at boot).  The following options are supported:
+#
+# discard -- this will cause --allow-discards to be passed to the cryptsetup
+# program while opening the LUKS volume.
+#
+# ro -- this will cause --readonly to be passed to the cryptsetup program while
+# opening the LUKS volume.
+#
+# swap -- this option cannot be used with other options.  The device given will
+# be formatted as a new encrypted volume with a random key on boot, and used as
+# swap.
+#
+if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then
+  # First, check for device-mapper support.
+  if ! grep -wq device-mapper /proc/devices ; then
+    # If device-mapper exists as a module, try to load it.
+    # Try to load a device-mapper kernel module:
+    /sbin/modprobe -q dm-mod
+  fi
+  # NOTE: we only support LUKS formatted volumes (except for swap)!
+  cat /etc/crypttab | grep -v "^#" | grep -v "^$" | while read line; do
+    eval LUKSARRAY=( $line )
+    LUKS="${LUKSARRAY[0]}"
+    DEV="${LUKSARRAY[1]}"
+    PASS="${LUKSARRAY[2]}"
+    OPTS="${LUKSARRAY[3]}"
+    LUKSOPTS=""
+    if echo $OPTS | grep -wq ro ; then LUKSOPTS="${LUKSOPTS} --readonly" ; fi
+    if echo $OPTS | grep -wq discard ; then LUKSOPTS="${LUKSOPTS} --allow-discards" ; fi
+    # Skip LUKS volumes that were already unlocked (in the initrd):
+    /sbin/cryptsetup status $LUKS 2>/dev/null | head -n 1 | grep -q "is active" && continue
+    if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then
+      if [ -z "${LUKSOPTS}" ]; then
+        echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV':"
+      else
+        echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV' with options '${LUKSOPTS}':"
+      fi
+      if [ -n "${PASS}" -a "${PASS}" != "none" ]; then
+        if [ -f "${PASS}" ]; then
+          # A password was given a key-file filename
+          /sbin/cryptsetup ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS
+        else
+          # A password was provided in plain text
+          echo "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
+        fi
+      else
+        # No password was given, or a password of 'none' was given
+        /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
+      fi
+    elif echo $OPTS | grep -wq swap ; then
+      # If any of the volumes is to be used as encrypted swap,
+      # then encrypt it using a random key and run mkswap:
+      echo "Creating encrypted swap volume '${LUKS}' on device '$DEV':"
+      /sbin/cryptsetup --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV
+      mkswap /dev/mapper/$LUKS
+    fi
+  done
+fi
+
+# Enable swapping:
+/sbin/swapon -a 2> /dev/null
+
+# Start FUSE, if requested:
+if [ -x /etc/rc.d/rc.fuse ]; then
+  sh /etc/rc.d/rc.fuse start
+fi
+
+# Set the tick and frequency for the system clock.
+# Default values are: TICK=10000 and FREQ=0
+TICK=10000
+FREQ=0
+# If there's a /etc/default/adjtimex config file, source it to override
+# the default TICK and FREQ:
+if [ -r /etc/default/adjtimex ]; then
+  . /etc/default/adjtimex
+fi
+if /sbin/adjtimex --tick $TICK --frequency $FREQ; then
+  echo "Setting the system clock rate:  /sbin/adjtimex --tick $TICK --frequency $FREQ"
+else
+  echo "Failed to set system clock with adjtimex, possibly invalid parameters? (TICK=$TICK FREQ=$FREQ)"
+fi
+
+# Set the system time from the hardware clock using hwclock --hctosys.
+if [ -x /sbin/hwclock ]; then
+  # Check for a broken motherboard RTC clock (where ioports for rtc are
+  # unknown) to prevent hwclock causing a hang:
+  if ! grep -q " : rtc" /proc/ioports ; then
+    CLOCK_OPT="--directisa"
+  fi
+  if [ /etc/adjtime -nt /etc/hardwareclock ]; then
+    if grep -q "^LOCAL" /etc/adjtime ; then
+      echo -n "Setting system time from the hardware clock (localtime):  "
+    else
+      echo -n "Setting system time from the hardware clock (UTC):  "
+    fi
+    /sbin/hwclock $CLOCK_OPT --hctosys
+  elif grep -wq "^localtime" /etc/hardwareclock 2> /dev/null ; then
+    echo -n "Setting system time from the hardware clock (localtime):  "
+    /sbin/hwclock $CLOCK_OPT --localtime --hctosys
+  else
+    echo -n "Setting system time from the hardware clock (UTC):  "
+    /sbin/hwclock $CLOCK_OPT --utc --hctosys
+  fi
+  date
+fi
+
+# Test to see if the root partition is read-only, like it ought to be.
+READWRITE=no
+if touch /fsrwtestfile 2>/dev/null; then
+  rm -f /fsrwtestfile
+  READWRITE=yes
+else
+  echo "Testing root filesystem status:  read-only filesystem"
+fi
+
+# See if a forced filesystem check was requested at shutdown:
+if [ -r /etc/forcefsck ]; then
+  FORCEFSCK="-f"
+fi
+
+# Check the root filesystem:
+if [ ! $READWRITE = yes ]; then
+  RETVAL=0
+  if [ ! -r /etc/fastboot ]; then
+    echo "Checking root filesystem:"
+    /sbin/fsck $FORCEFSCK -C -a /
+    RETVAL=$?
+  fi
+  # An error code of 2 or higher will require a reboot.
+  if [ $RETVAL -ge 2 ]; then
+    # An error code equal to or greater than 4 means that some errors
+    # could not be corrected.  This requires manual attention, so we
+    # offer a chance to try to fix the problem in single-user mode:
+    if [ $RETVAL -ge 4 ]; then
+      echo
+      echo "***********************************************************"
+      echo "*** An error occurred during the root filesystem check. ***"
+      echo "*** You will now be given a chance to log into the      ***"
+      echo "*** system in single-user mode to fix the problem.      ***"
+      echo "***                                                     ***"
+      echo "*** If you are using the ext2 filesystem, running       ***"
+      echo "*** 'e2fsck -v -y <partition>' might help.              ***"
+      echo "***********************************************************"
+      echo
+      echo "Once you exit the single-user shell, the system will reboot."
+      echo
+      PS1="(Repair filesystem) \#"; export PS1
+      sulogin
+    else # With an error code of 2 or 3, reboot the machine automatically:
+      echo
+      echo "***********************************"
+      echo "*** The filesystem was changed. ***"
+      echo "*** The system will now reboot. ***"
+      echo "***********************************"
+      echo
+    fi
+    echo "Unmounting file systems."
+    /sbin/umount -a -r
+    /sbin/mount -n -o remount,ro /
+    echo "Rebooting system."
+    sleep 2
+    reboot -f
+  fi
+  # Remount the root filesystem in read-write mode
+  echo "Remounting root device with read-write enabled."
+  /sbin/mount -w -v -n -o remount /
+  if [ $? -gt 0 ] ; then
+    echo "FATAL:  Attempt to remount root device as read-write failed!  This is going to"
+    echo "cause serious problems."
+  fi
+else
+  echo "Testing root filesystem status:  read-write filesystem"
+  echo
+  echo "ERROR: Root partition has already been mounted read-write. Cannot check!"
+  echo
+  echo "For filesystem checking to work properly, your system must initially mount"
+  echo "the root partition as read only.  If you're booting with LILO, add a line:"
+  echo
+  echo "   read-only"
+  echo
+  echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
+fi # Done checking root filesystem
+
+
+# Any /etc/mtab that exists here is old, so we start with a new one:
+/bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
+
+# Add entry for / to /etc/mtab:
+/sbin/mount -f -w /
+
+# Add /proc, /sys, and /dev/shm mounts to /etc/mtab:
+if [ -d /proc/sys ]; then
+  /sbin/mount -f -t proc proc /proc
+fi
+if [ -d /sys/bus ]; then
+  /sbin/mount -f -t sysfs sysfs /sys
+fi
+if grep -q '^[^ ]\+ /dev/shm ' /proc/mounts 2> /dev/null ; then
+  /sbin/mount -f -t tmpfs tmpfs /dev/shm
+fi
+
+# Configure ISA Plug-and-Play devices:
+if [ -r /etc/isapnp.conf ]; then
+  if [ -x /sbin/isapnp ]; then
+    /sbin/isapnp /etc/isapnp.conf
+  fi
+fi
+
+# Run the kernel module script.  This updates the module dependencies and
+# also supports manually loading kernel modules through rc.modules.local.
+if [ -x /etc/rc.d/rc.modules ]; then
+  . /etc/rc.d/rc.modules
+fi
+
+# Configure kernel parameters:
+if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
+  echo "Configuring kernel parameters:  /sbin/sysctl -e --system"
+  /sbin/sysctl -e --system
+elif [ -x /sbin/sysctl  ]; then
+  echo "Configuring kernel parameters:  /sbin/sysctl -e --system"
+  # Don't say "Applying /etc/sysctl.conf" or complain if the file doesn't exist
+  /sbin/sysctl -e --system 2> /dev/null | grep -v "Applying /etc/sysctl.conf"
+fi
+
+# Check all the non-root filesystems:
+if [ ! -r /etc/fastboot ]; then
+  echo "Checking non-root filesystems:"
+  /sbin/fsck $FORCEFSCK -C -R -A -a
+fi
+
+# Mount usbfs only if it is found in /etc/fstab:
+if grep -wq usbfs /proc/filesystems; then
+  if ! grep -wq usbfs /proc/mounts ; then
+    if grep -wq usbfs /etc/fstab; then
+      /sbin/mount -v /proc/bus/usb
+    fi
+  fi
+fi
+
+# Mount non-root file systems in fstab, but not NFS or SMB 
+# because TCP/IP is not yet configured, and not proc or sysfs
+# because those have already been mounted.  Also check that
+# devpts is not already mounted before attempting to mount
+# it.  With a 2.6.x or newer kernel udev mounts devpts.
+# We also need to wait a little bit to let USB and other
+# hotplugged devices settle (sorry to slow down the boot):
+echo "Mounting non-root local filesystems:"
+if /bin/grep -wq devpts /proc/mounts ; then
+  # This pipe after the mount command is just to convert the new
+  # mount verbose output back to the old format that contained
+  # more useful information:
+  /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+else
+  /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+fi
+
+# Enable swapping again.  This is needed in case a swapfile is used,
+# as it can't be enabled until the filesystem it resides on has been
+# mounted read-write.
+/sbin/swapon -a 2> /dev/null
+
+# Start cgmanager (or cgproxy in a container):
+if [ -x /etc/rc.d/rc.cgmanager -a -d /sys/fs/cgroup ]; then
+  sh /etc/rc.d/rc.cgmanager start
+fi
+
+# Clean up some temporary files:
+rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \
+  /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot \
+  /var/state/saslauthd/saslauthd.pid \
+  /tmp/.Xauth* 1> /dev/null 2> /dev/null
+  ( cd /var/log/setup/tmp && rm -rf * )
+  ( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
+
+# Clear /var/lock/subsys:
+if [ -d /var/lock/subsys ]; then
+  rm -f /var/lock/subsys/*
+fi
+
+# Create /tmp/{.ICE-unix,.X11-unix} if they are not present:
+if [ ! -e /tmp/.ICE-unix ]; then
+  mkdir -p /tmp/.ICE-unix
+  chmod 1777 /tmp/.ICE-unix
+fi
+if [ ! -e /tmp/.X11-unix ]; then
+  mkdir -p /tmp/.X11-unix
+  chmod 1777 /tmp/.X11-unix
+fi
+
+# Create a fresh utmp file:
+touch /var/run/utmp
+chown root:utmp /var/run/utmp
+chmod 664 /var/run/utmp
+
+# Update the current kernel level in the /etc/motd (Message Of The Day) file,
+# if the first line of that file begins with the word 'Linux'.
+# You are free to modify the rest of the file as you see fit.
+if [ -x /bin/sed ]; then
+  /bin/sed -i "{1s/^Linux.*/$(/bin/uname -sr)\./}" /etc/motd
+fi
+
+# If there are SystemV init scripts for this runlevel, run them.
+if [ -x /etc/rc.d/rc.sysvinit ]; then
+  . /etc/rc.d/rc.sysvinit
+fi
+
+# Run serial port setup script:
+# CAREFUL!  This can make some systems hang if the rc.serial script isn't
+# set up correctly.  If this happens, you may have to edit the file from a
+# boot disk, and/or set it as non-executable:
+if [ -x /etc/rc.d/rc.serial ]; then
+  sh /etc/rc.d/rc.serial start
+fi
+
+# Carry an entropy pool between reboots to improve randomness.
+if [ -f /etc/random-seed ]; then
+  echo "Using /etc/random-seed to initialize /dev/urandom."
+  cat /etc/random-seed > /dev/urandom
+fi
+# Use the pool size from /proc, or 4096 bits:
+if [ -r /proc/sys/kernel/random/poolsize ]; then
+  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(expr $(cat /proc/sys/kernel/random/poolsize) / 8) 2> /dev/null
+else
+  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
+fi
+chmod 600 /etc/random-seed
+
diff --git a/etc/rc.d/rc.S.orig b/etc/rc.d/rc.S.orig
new file mode 100644
index 0000000..20064e5
--- /dev/null
+++ b/etc/rc.d/rc.S.orig
@@ -0,0 +1,445 @@
+#!/bin/sh
+#
+# /etc/rc.d/rc.S:  System initialization script.
+#
+# Mostly written by:  Patrick J. Volkerding, <volkerdi@slackware.com>
+#
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+# Try to mount /proc:
+/sbin/mount -v proc /proc -n -t proc 2> /dev/null
+
+# Mount sysfs next, if the kernel supports it:
+if [ -d /sys ]; then
+  if grep -wq sysfs /proc/filesystems ; then
+    if ! grep -wq sysfs /proc/mounts ; then
+      /sbin/mount -v sysfs /sys -n -t sysfs
+    fi
+  fi
+fi
+
+# If /run exists, mount a tmpfs on it (unless the
+# initrd has already done so):
+if [ -d /run ]; then
+  if ! grep -wq "tmpfs /run tmpfs" /proc/mounts ; then
+    /sbin/mount -v -n -t tmpfs tmpfs /run -o mode=0755
+  fi
+fi
+
+# Load the loop device kernel module:
+if [ -x /etc/rc.d/rc.loop ]; then
+  . /etc/rc.d/rc.loop start
+fi
+
+# Initialize udev to manage /dev entries and hotplugging.
+# You may turn off udev by making the /etc/rc.d/rc.udev file non-executable
+# or giving the "nohotplug" option at boot, but realize that if you turn off
+# udev that you will have to load all the kernel modules that you need
+# yourself (possibly in /etc/rc.d/rc.modules.local), and make any additional
+# device nodes that you need in the /dev directory.  Even USB and IEEE1394
+# devices will need to have the modules loaded by hand if udev is not used.
+# So use it.  :-)
+if grep -wq sysfs /proc/mounts && grep -q devtmpfs /proc/filesystems ; then
+  if ! grep -wq nohotplug /proc/cmdline ; then
+    if [ -x /etc/rc.d/rc.udev ]; then
+      /bin/sh /etc/rc.d/rc.udev start
+    fi
+  fi
+fi
+
+# Mount Control Groups filesystem interface:
+if grep -wq cgroup /proc/filesystems ; then
+  if [ -d /sys/fs/cgroup ]; then
+    # See linux-*/Documentation/cgroups/cgroups.txt (section 1.6)
+    # Check if we have some tools to autodetect the available cgroup controllers
+    if [ -x /bin/cut -a -x /bin/tail ]; then
+      # Mount a tmpfs as the cgroup filesystem root
+      mount -t tmpfs -o mode=0755 cgroup_root /sys/fs/cgroup
+      # Autodetect available controllers and mount them in subfolders
+      controllers="$(/bin/cut -f 1 /proc/cgroups | /bin/tail -n +2)"
+      for i in $controllers; do
+        mkdir /sys/fs/cgroup/$i
+        mount -t cgroup -o $i $i /sys/fs/cgroup/$i
+      done
+      unset i controllers
+    else
+      # We can't use autodetection so fall back mounting them all together
+      mount -t cgroup cgroup /sys/fs/cgroup
+    fi
+  else
+    mkdir -p /dev/cgroup
+    mount -t cgroup cgroup /dev/cgroup
+  fi
+fi
+
+
+# Initialize the Logical Volume Manager.
+# This won't start unless we find /etc/lvmtab (LVM1) or
+# /etc/lvm/backup/ (LVM2).  This is created by /sbin/vgscan, so to
+# use LVM you must run /sbin/vgscan yourself the first time (and
+# create some VGs and LVs).
+# Create LVM lock/run directories:
+mkdir -p -m 0700 /run/lvm /run/lock /run/lock/lvm
+if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
+  echo "Initializing LVM (Logical Volume Manager):"
+  # Check for device-mapper support.
+  if ! grep -wq device-mapper /proc/devices ; then
+    # Try to load a device-mapper kernel module:
+    /sbin/modprobe -q dm-mod
+  fi
+  # Scan for new volume groups:
+  /sbin/vgscan --mknodes --ignorelockingfailure 2> /dev/null
+  if [ $? = 0 ]; then
+    # Make volume groups available to the kernel.
+    # This should also make logical volumes available.
+    /sbin/vgchange -ay --ignorelockingfailure
+  fi
+fi
+
+# Open any volumes created by cryptsetup.
+#
+# Some notes on /etc/crypttab in Slackware:
+# Only LUKS formatted volumes are supported (except for swap)
+# crypttab follows the following format:
+# <luks_name> <device> <password> <options>
+#
+# <luks_name>:  This is the name of your LUKS volume.
+# For example:  crypt-home
+#
+# <device>:  This is the device containing your LUKS volume.
+# For example:  /dev/sda2
+#
+# <password>:  This is either the volume password in plain text, or the name of
+# a key file.  Use 'none' to interactively enter password on boot.
+#
+# <options>:  Comma-separated list of options.  Note that there must be a
+# password field for any options to be picked up (use a password of 'none' to
+# get a password prompt at boot).  The following options are supported:
+#
+# discard -- this will cause --allow-discards to be passed to the cryptsetup
+# program while opening the LUKS volume.
+#
+# ro -- this will cause --readonly to be passed to the cryptsetup program while
+# opening the LUKS volume.
+#
+# swap -- this option cannot be used with other options.  The device given will
+# be formatted as a new encrypted volume with a random key on boot, and used as
+# swap.
+#
+if [ -f /etc/crypttab -a -x /sbin/cryptsetup ]; then
+  # First, check for device-mapper support.
+  if ! grep -wq device-mapper /proc/devices ; then
+    # If device-mapper exists as a module, try to load it.
+    # Try to load a device-mapper kernel module:
+    /sbin/modprobe -q dm-mod
+  fi
+  # NOTE: we only support LUKS formatted volumes (except for swap)!
+  cat /etc/crypttab | grep -v "^#" | grep -v "^$" | while read line; do
+    eval LUKSARRAY=( $line )
+    LUKS="${LUKSARRAY[0]}"
+    DEV="${LUKSARRAY[1]}"
+    PASS="${LUKSARRAY[2]}"
+    OPTS="${LUKSARRAY[3]}"
+    LUKSOPTS=""
+    if echo $OPTS | grep -wq ro ; then LUKSOPTS="${LUKSOPTS} --readonly" ; fi
+    if echo $OPTS | grep -wq discard ; then LUKSOPTS="${LUKSOPTS} --allow-discards" ; fi
+    # Skip LUKS volumes that were already unlocked (in the initrd):
+    /sbin/cryptsetup status $LUKS 2>/dev/null | head -n 1 | grep -q "is active" && continue
+    if /sbin/cryptsetup isLuks $DEV 2>/dev/null ; then
+      if [ -z "${LUKSOPTS}" ]; then
+        echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV':"
+      else
+        echo "Unlocking LUKS encrypted volume '${LUKS}' on device '$DEV' with options '${LUKSOPTS}':"
+      fi
+      if [ -n "${PASS}" -a "${PASS}" != "none" ]; then
+        if [ -f "${PASS}" ]; then
+          # A password was given a key-file filename
+          /sbin/cryptsetup ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS
+        else
+          # A password was provided in plain text
+          echo "${PASS}" | /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS
+        fi
+      else
+        # No password was given, or a password of 'none' was given
+        /sbin/cryptsetup ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
+      fi
+    elif echo $OPTS | grep -wq swap ; then
+      # If any of the volumes is to be used as encrypted swap,
+      # then encrypt it using a random key and run mkswap:
+      echo "Creating encrypted swap volume '${LUKS}' on device '$DEV':"
+      /sbin/cryptsetup --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV
+      mkswap /dev/mapper/$LUKS
+    fi
+  done
+fi
+
+# Enable swapping:
+/sbin/swapon -a 2> /dev/null
+
+# Start FUSE, if requested:
+if [ -x /etc/rc.d/rc.fuse ]; then
+  sh /etc/rc.d/rc.fuse start
+fi
+
+# Set the tick and frequency for the system clock.
+# Default values are: TICK=10000 and FREQ=0
+TICK=10000
+FREQ=0
+# If there's a /etc/default/adjtimex config file, source it to override
+# the default TICK and FREQ:
+if [ -r /etc/default/adjtimex ]; then
+  . /etc/default/adjtimex
+fi
+if /sbin/adjtimex --tick $TICK --frequency $FREQ; then
+  echo "Setting the system clock rate:  /sbin/adjtimex --tick $TICK --frequency $FREQ"
+else
+  echo "Failed to set system clock with adjtimex, possibly invalid parameters? (TICK=$TICK FREQ=$FREQ)"
+fi
+
+# Set the system time from the hardware clock using hwclock --hctosys.
+if [ -x /sbin/hwclock ]; then
+  # Check for a broken motherboard RTC clock (where ioports for rtc are
+  # unknown) to prevent hwclock causing a hang:
+  if ! grep -q " : rtc" /proc/ioports ; then
+    CLOCK_OPT="--directisa"
+  fi
+  if [ /etc/adjtime -nt /etc/hardwareclock ]; then
+    if grep -q "^LOCAL" /etc/adjtime ; then
+      echo -n "Setting system time from the hardware clock (localtime):  "
+    else
+      echo -n "Setting system time from the hardware clock (UTC):  "
+    fi
+    /sbin/hwclock $CLOCK_OPT --hctosys
+  elif grep -wq "^localtime" /etc/hardwareclock 2> /dev/null ; then
+    echo -n "Setting system time from the hardware clock (localtime):  "
+    /sbin/hwclock $CLOCK_OPT --localtime --hctosys
+  else
+    echo -n "Setting system time from the hardware clock (UTC):  "
+    /sbin/hwclock $CLOCK_OPT --utc --hctosys
+  fi
+  date
+fi
+
+# Test to see if the root partition is read-only, like it ought to be.
+READWRITE=no
+if touch /fsrwtestfile 2>/dev/null; then
+  rm -f /fsrwtestfile
+  READWRITE=yes
+else
+  echo "Testing root filesystem status:  read-only filesystem"
+fi
+
+# See if a forced filesystem check was requested at shutdown:
+if [ -r /etc/forcefsck ]; then
+  FORCEFSCK="-f"
+fi
+
+# Check the root filesystem:
+if [ ! $READWRITE = yes ]; then
+  RETVAL=0
+  if [ ! -r /etc/fastboot ]; then
+    echo "Checking root filesystem:"
+    /sbin/fsck $FORCEFSCK -C -a /
+    RETVAL=$?
+  fi
+  # An error code of 2 or higher will require a reboot.
+  if [ $RETVAL -ge 2 ]; then
+    # An error code equal to or greater than 4 means that some errors
+    # could not be corrected.  This requires manual attention, so we
+    # offer a chance to try to fix the problem in single-user mode:
+    if [ $RETVAL -ge 4 ]; then
+      echo
+      echo "***********************************************************"
+      echo "*** An error occurred during the root filesystem check. ***"
+      echo "*** You will now be given a chance to log into the      ***"
+      echo "*** system in single-user mode to fix the problem.      ***"
+      echo "***                                                     ***"
+      echo "*** If you are using the ext2 filesystem, running       ***"
+      echo "*** 'e2fsck -v -y <partition>' might help.              ***"
+      echo "***********************************************************"
+      echo
+      echo "Once you exit the single-user shell, the system will reboot."
+      echo
+      PS1="(Repair filesystem) \#"; export PS1
+      sulogin
+    else # With an error code of 2 or 3, reboot the machine automatically:
+      echo
+      echo "***********************************"
+      echo "*** The filesystem was changed. ***"
+      echo "*** The system will now reboot. ***"
+      echo "***********************************"
+      echo
+    fi
+    echo "Unmounting file systems."
+    /sbin/umount -a -r
+    /sbin/mount -n -o remount,ro /
+    echo "Rebooting system."
+    sleep 2
+    reboot -f
+  fi
+  # Remount the root filesystem in read-write mode
+  echo "Remounting root device with read-write enabled."
+  /sbin/mount -w -v -n -o remount /
+  if [ $? -gt 0 ] ; then
+    echo "FATAL:  Attempt to remount root device as read-write failed!  This is going to"
+    echo "cause serious problems."
+  fi
+else
+  echo "Testing root filesystem status:  read-write filesystem"
+  echo
+  echo "ERROR: Root partition has already been mounted read-write. Cannot check!"
+  echo
+  echo "For filesystem checking to work properly, your system must initially mount"
+  echo "the root partition as read only.  If you're booting with LILO, add a line:"
+  echo
+  echo "   read-only"
+  echo
+  echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
+fi # Done checking root filesystem
+
+
+# Any /etc/mtab that exists here is old, so we start with a new one:
+/bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
+
+# Add entry for / to /etc/mtab:
+/sbin/mount -f -w /
+
+# Add /proc, /sys, and /dev/shm mounts to /etc/mtab:
+if [ -d /proc/sys ]; then
+  /sbin/mount -f -t proc proc /proc
+fi
+if [ -d /sys/bus ]; then
+  /sbin/mount -f -t sysfs sysfs /sys
+fi
+if grep -q '^[^ ]\+ /dev/shm ' /proc/mounts 2> /dev/null ; then
+  /sbin/mount -f -t tmpfs tmpfs /dev/shm
+fi
+
+# Configure ISA Plug-and-Play devices:
+if [ -r /etc/isapnp.conf ]; then
+  if [ -x /sbin/isapnp ]; then
+    /sbin/isapnp /etc/isapnp.conf
+  fi
+fi
+
+# Run the kernel module script.  This updates the module dependencies and
+# also supports manually loading kernel modules through rc.modules.local.
+if [ -x /etc/rc.d/rc.modules ]; then
+  . /etc/rc.d/rc.modules
+fi
+
+# Configure kernel parameters:
+if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
+  echo "Configuring kernel parameters:  /sbin/sysctl -e --system"
+  /sbin/sysctl -e --system
+elif [ -x /sbin/sysctl  ]; then
+  echo "Configuring kernel parameters:  /sbin/sysctl -e --system"
+  # Don't say "Applying /etc/sysctl.conf" or complain if the file doesn't exist
+  /sbin/sysctl -e --system 2> /dev/null | grep -v "Applying /etc/sysctl.conf"
+fi
+
+# Check all the non-root filesystems:
+if [ ! -r /etc/fastboot ]; then
+  echo "Checking non-root filesystems:"
+  /sbin/fsck $FORCEFSCK -C -R -A -a
+fi
+
+# Mount usbfs only if it is found in /etc/fstab:
+if grep -wq usbfs /proc/filesystems; then
+  if ! grep -wq usbfs /proc/mounts ; then
+    if grep -wq usbfs /etc/fstab; then
+      /sbin/mount -v /proc/bus/usb
+    fi
+  fi
+fi
+
+# Mount non-root file systems in fstab, but not NFS or SMB 
+# because TCP/IP is not yet configured, and not proc or sysfs
+# because those have already been mounted.  Also check that
+# devpts is not already mounted before attempting to mount
+# it.  With a 2.6.x or newer kernel udev mounts devpts.
+# We also need to wait a little bit to let USB and other
+# hotplugged devices settle (sorry to slow down the boot):
+echo "Mounting non-root local filesystems:"
+sleep 3
+if /bin/grep -wq devpts /proc/mounts ; then
+  # This pipe after the mount command is just to convert the new
+  # mount verbose output back to the old format that contained
+  # more useful information:
+  /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+else
+  /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+fi
+
+# Enable swapping again.  This is needed in case a swapfile is used,
+# as it can't be enabled until the filesystem it resides on has been
+# mounted read-write.
+/sbin/swapon -a 2> /dev/null
+
+# Start cgmanager (or cgproxy in a container):
+if [ -x /etc/rc.d/rc.cgmanager -a -d /sys/fs/cgroup ]; then
+  sh /etc/rc.d/rc.cgmanager start
+fi
+
+# Clean up some temporary files:
+rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \
+  /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot \
+  /var/state/saslauthd/saslauthd.pid \
+  /tmp/.Xauth* 1> /dev/null 2> /dev/null
+  ( cd /var/log/setup/tmp && rm -rf * )
+  ( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
+
+# Clear /var/lock/subsys:
+if [ -d /var/lock/subsys ]; then
+  rm -f /var/lock/subsys/*
+fi
+
+# Create /tmp/{.ICE-unix,.X11-unix} if they are not present:
+if [ ! -e /tmp/.ICE-unix ]; then
+  mkdir -p /tmp/.ICE-unix
+  chmod 1777 /tmp/.ICE-unix
+fi
+if [ ! -e /tmp/.X11-unix ]; then
+  mkdir -p /tmp/.X11-unix
+  chmod 1777 /tmp/.X11-unix
+fi
+
+# Create a fresh utmp file:
+touch /var/run/utmp
+chown root:utmp /var/run/utmp
+chmod 664 /var/run/utmp
+
+# Update the current kernel level in the /etc/motd (Message Of The Day) file,
+# if the first line of that file begins with the word 'Linux'.
+# You are free to modify the rest of the file as you see fit.
+if [ -x /bin/sed ]; then
+  /bin/sed -i "{1s/^Linux.*/$(/bin/uname -sr)\./}" /etc/motd
+fi
+
+# If there are SystemV init scripts for this runlevel, run them.
+if [ -x /etc/rc.d/rc.sysvinit ]; then
+  . /etc/rc.d/rc.sysvinit
+fi
+
+# Run serial port setup script:
+# CAREFUL!  This can make some systems hang if the rc.serial script isn't
+# set up correctly.  If this happens, you may have to edit the file from a
+# boot disk, and/or set it as non-executable:
+if [ -x /etc/rc.d/rc.serial ]; then
+  sh /etc/rc.d/rc.serial start
+fi
+
+# Carry an entropy pool between reboots to improve randomness.
+if [ -f /etc/random-seed ]; then
+  echo "Using /etc/random-seed to initialize /dev/urandom."
+  cat /etc/random-seed > /dev/urandom
+fi
+# Use the pool size from /proc, or 4096 bits:
+if [ -r /proc/sys/kernel/random/poolsize ]; then
+  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(expr $(cat /proc/sys/kernel/random/poolsize) / 8) 2> /dev/null
+else
+  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
+fi
+chmod 600 /etc/random-seed
+
diff --git a/etc/slackpkg/blacklist b/etc/slackpkg/blacklist
index 20d752a..9d6fbf8 100644
--- a/etc/slackpkg/blacklist
+++ b/etc/slackpkg/blacklist
@@ -37,7 +37,7 @@ seamonkey-solibs
 # n
 ModemManager
 NetworkManager
-mobile-broadband-provider
+mobile-broadband-provider-info
 
 # x
 ttf-indic-fonts
@@ -57,7 +57,7 @@ rxvt
 #
 # -- Replaced:
 # pulseaudio, alsa-plugins, pavucontrol, pamixer: ALSA
-# NetworkManager, ModemManager, mobile-broadband-provider, network-manager-applet: dhcpcd/wpa_supplicant
+# NetworkManager, ModemManager, mobile-broadband-provider-info, network-manager-applet: dhcpcd/wpa_supplicant
 # elvis: vim
 # rxvt: rxvt-unicode
 # gcc-go: go (They actually conflict)
diff --git a/readme.txt b/readme.txt
index 81cfea6..ccff241 100644
--- a/readme.txt
+++ b/readme.txt
@@ -9,6 +9,9 @@ Changes:
 /etc/rc.d/rc.M:
 - Added entry for dhcpcd
 
+/etc/rc.d/rc.S:
+- Removed useless sleep before mounting local filesystems.
+
 /etc/rc.d/rc.dhcpcd:
 - Just run dhcpcd on boot
 
diff --git a/rocket-config.SlackBuild b/rocket-config.SlackBuild
index 1372b63..ca65b61 100755
--- a/rocket-config.SlackBuild
+++ b/rocket-config.SlackBuild
@@ -2,7 +2,7 @@
 
 PKGNAM=rocket-config
 VERSION=14.2
-BUILD=${BUILD:-3rocket}
+BUILD=${BUILD:-4rocket}
 ARCH=noarch
 
 CWD=$(pwd)